Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

The Bread Topic (2016–)


DianaM

Recommended Posts

43 minutes ago, Ann_T said:

Thanks @Smithy and @JoNorvelleWalker.   And thank you @Shelby.  I know what I will be doing on my next day off.

 

 

You have tried vinegar already?

 

Cooking is cool.  And kitchen gear is even cooler.  -- Chad Ward

Whatever you crave, there's a dumpling for you. -- Hsiao-Ching Chou

Link to comment
Share on other sites

On 1/18/2020 at 8:28 PM, JoNorvelleWalker said:

 

You have tried vinegar already?

 

 

On 1/18/2020 at 9:17 PM, Ann_T said:

Yes! But maybe I will try it again first.

 

One potential alternative may be citric acid -- that is what is in most coffee descaling solutions. You can buy it as a powder and mix it a bit stronger than your garden variety vinegar. 

It has the added benefit of having almost no odor -- less of a concern for the CSO, but really useful for coffee machines!

  • Thanks 1
Link to comment
Share on other sites

Yesterday's loaf.  Three pound Pumpernickel Rye loaf.  30% Bread flour,  40% Dark Rye flour,  15% Pumpernickel flour,  15%  Caraway seeds, Ground Caraway,  Hemp seeds.  Sugar (1 cup),  Salt,  Yeast,  Water.  Plus poolish.    

Poolish was started on Sunday, 24 hours at room temp then into the fridge, refrushed with 1/4 cup of flour yesterday morning. I went off to see cardiologist, home at 2.

Had already measured all dry ingredients into a container, except for the yeast and salt.

Put water, poolish, dry ingredients into bread machine,  turned on and it mixed and kneaded thru first cycle.  Stopped it, reset to start but left it off for 40 minutes  autolyse.  Restarted and added salt, waited a couple of minutes for it to work in and added the yeast.  

After last brief "knock down"  I removed dough from machine and removed paddles, shaped slightly and replaced iin machine and let it finish rise and bake.

 

I'm very pleased with the result.  I doubled the amount of sugar I usually use and note that the moisture is better, the structure of the crumb is more even but it does not taste very sweet and I believe that is due to the flavor of the ground caraway plus the whole caraway which does have a bitter component.

In any event, the flavor is very good, better than other loaves I have made with a higher percentage of pumpernickel.

 

1424169833_Pumpernickel12120.jpg.79c4393fef041c6455eeeb61a8835ad1.jpg

 

1480835322_Pumpernickel2-121203.jpg.b0bc3c1191cf3cd3e52969173ebf2a2b.jpg

 

1867598859_Pumpernickel4-121204.thumb.jpg.4df08ef4b757e763e232e252073a37f3.jpg

  • Like 9
  • Delicious 2

"There are, it has been said, two types of people in the world. There are those who say: this glass is half full. And then there are those who say: this glass is half empty. The world belongs, however, to those who can look at the glass and say: What's up with this glass? Excuse me? Excuse me? This is my glass? I don't think so. My glass was full! And it was a bigger glass!" Terry Pratchett

 

Link to comment
Share on other sites

Crumb was more open than last week.  Still dense.  The Ankarsrum dough hook is more pleasant to use than the roller but the roller gave better crumb.  I can't say I understand this.

 

Cooking is cool.  And kitchen gear is even cooler.  -- Chad Ward

Whatever you crave, there's a dumpling for you. -- Hsiao-Ching Chou

Link to comment
Share on other sites

Two focaccia...focacce? Started out with the foacccia recipe in Ottolenghi, subbed in 50% stone ground whole wheat flour (Sonora/Red Fife blend) and  divided it into two 1/4 sheet pans instead of one 1/2 sheet.

Topped one pan with red onion and goat cheese, one of the 3 topping choices in the Ottolenghi recipe.   Used the other one to make the Fried Kimchi Focaccia from Everyday Korean available online here) in which a heaping cup of chopped kimchi is fried in butter until the edges start to brown, then used to top the focaccia.  I added a sprinkle of mozzarella to that one. 

IMG_1914.thumb.jpeg.e287c5b9092810dc47ea88655cd54703.jpeg

 

Messy crumb photo

IMG_1916.thumb.jpeg.d6b0f9b38a189aa51f6ae4e7d5ab690a.jpeg

 

The kimchi focaccia is surprisingly good. After being fried in butter than baked, the flavor is still tangy and funky but not harsh at all.  Next time, I'll drop the temp or turn off the convection so it doesn't brown so quickly. 

  • Like 11
  • Delicious 1
Link to comment
Share on other sites

Yesterday's Bake. Inspired by @liamsaunt.

Forgot that I had the Bread Illustrated book.

431292051_RyebreadandaCranberryToastedWalnutBakeFebruary12th20202.thumb.jpg.843f13da59f23851672c1525747f5a0b.jpg

 

Found the Rye and another loaf that looked good, Cranberry with toasted walnuts.  

Made them both in the KA with a few autolyze rests in between running the machine.  

Staggered the batches so that they wouldn't both be ready to bake at the same time. 

620079412_RyebreadandaCranberryToastedWalnutBakeFebruary12th20202.thumb.jpg.899d34d1d2130dc39a7f3b7bc7fc2468.jpg

 

 

Sliced both this morning because Moe wanted to try them both.

607376848_RyebreadandaCranberryToastedWalnutBakeFebruary12th20203.thumb.jpg.6e0b2a1050ce077cf6248a72c44e7a92.jpg

Recipe called for caraway seeds which I left out. Not a fan. 

This is a really nice light rye.

 

And the Cranberry with the toasted walnuts I think should go well with brie. 

 

Edited by Ann_T (log)
  • Like 10
  • Delicious 1
Link to comment
Share on other sites

28 minutes ago, Okanagancook said:

How do you cook the pita to get the char spots?

 

I put the baking steel on a shelf that's a bit above mid-way in the oven, pre-heat to 500°F, then switch to broil when I start to bake them.  I quickly pull out the shelf, slap the dough on the steel and shut the door.  As they poof up, they get close enough to the broiler that they start to char. 

Edited to add that the Shaya cookbook says to put the steel (baking stone, cast-iron skillet) mid-way in the oven.  I get better results with it a little higher.  Probably depends on the oven. 

 

Edited by blue_dolphin (log)
  • Like 1
Link to comment
Share on other sites

Interesting.  I bake mine on a steel plate also but not with broil.  They come out nice and soft. Yours look soft too but one probably needs to be very attentive otherwise they would get too charred....I need to try this method...now I am wondering if a quick treatment on the open flame on my Wolfe has range would also get some char (I do this with chapati)...next time I see some experimenting...I like to make mine smaller also.

  • Like 1
Link to comment
Share on other sites

6 minutes ago, Okanagancook said:

Interesting.  I bake mine on a steel plate also but not with broil.  They come out nice and soft. Yours look soft too but one probably needs to be very attentive otherwise they would get too charred....I need to try this method...now I am wondering if a quick treatment on the open flame on my Wolfe has range would also get some char (I do this with chapati)...next time I see some experimenting...I like to make mine smaller also.

 

Yes, I do need to keep an eye on them and I was challenged yesterday because the light bulb inside the oven burnt out so I was peering into the window and really couldn't see the char until it was too late, like that one in the front.   New bulbs should be arriving tomorrow. 

I'd bet that a quick pass in the flame would be nice.  

  • Like 2
Link to comment
Share on other sites

×
×
  • Create New...