Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

Chocolates with that backroom finish


Recommended Posts

Ok, so we tend to show off the jewels of the production, but certainly in my kitchen, there is a lot of stuff produced that is less than picture perfect.

Let's bring them out into the light - as long as they taste good, the looks are bonus.

I'll open by demonstrating how not to make a beautiful cocoa butter swirl. It was beautiful, but the swirl stayed firmly in the mould. It is salty caramel and almond. Tasty!

IMAG0634.jpg

Link to post
Share on other sites

Oooo, what a nice topic, I've stopped myself from posting my chocolate because it wasnt very nice looking. Heres my first attempt at doing a molded chocolate with color, I know I didnt do everything correctly, I suck at tempering chocolate, I probably messed up the cocoa butter, I also dont want to do this again too soon.

1st Molded Chocolate with Colored Cocoa Butter.JPG

Link to post
Share on other sites

I too have suffered from less than beautiful results on far too many occasions. No pics yet, but wait for it; they'll come.

One of the phenomena I've routinely experienced, especially when molding plain chocolate shells (e.g. bittersweet 74%) is that some of the cavities come out looking stunning, while others have a dull finish. The cavities in the mold have been treated pretty much identically during my use and cleaning/polishing.

Is it likely that I either abused the molds in some way to get this or that perhaps some of the cavities weren't perfectly smooth to begin with?

I'm considering ordering a new set just to see what I can get out of them.

Steve Lebowitz

Doer of All Things

Steven Howard Confections

Slicing a warm slab of bacon is a lot like giving a ferret a shave. No matter how careful you are, somebody's going to get hurt - Alton Brown, "Good Eats"

Link to post
Share on other sites

Ooh! Ooh! I have some! :sad:

IMG_0552.jpg

It was about 77F in the kitchen yesterday afternoon, but I needed to make bonbons, and I wanted to make them fast. I cast the molds and immediately set them in the cooler, before they had even start to set. I'm guessing this was where I made my mistake, because a few mornings earlier I made several rounds of larger hemispheres that got a brief chill and came out fine, but were chilled after they looked set (and it was only 71, so there was a smaller temperature difference). I noticed a few of the cracks as I was filling the molds, put them back in the cooler to set the ganache, capped, and turned them out to reveal a mix of about half cracked and half not cracked in both of the molds. 33 to sell, 31 for management to eat. Ouch. Just when I start to think I know what I'm doing, chocolate has a way of keeping me humble.

Link to post
Share on other sites

Cracked shells and missing outer layers is too critical? Both items would be completely unsellable.

Naaah... A little clever marketing ('hand-crafted!' 'exclusive, very limited edition!' 'heirloom style'), and jacking up the price to about 250% of the cost of the ones that came out right, would have these bad boys flying out the door. There's one born every minute...

  • Like 1

Michaela, aka "Mjx"
Manager, eG Forums
mscioscia@egstaff.org

Link to post
Share on other sites

A piping bag full of tempered chocolate with a tiny tip and some carefully applied "random" piping, being sure to cover the cracks... add a sign reading "hand decorated chocolates" and management has to buy their snack along with everybody else. :biggrin:

  • Like 2

It's kinda like wrestling a gorilla... you don't stop when you're tired, you stop when the gorilla is tired.

Link to post
Share on other sites

A piping bag full of tempered chocolate with a tiny tip and some carefully applied "random" piping, being sure to cover the cracks... add a sign reading "hand decorated chocolates" and management has to buy their snack along with everybody else. :biggrin:

Nice try, but I think piping on top of molded and often even dipped pieces is so ugly.

Link to post
Share on other sites

Nice try, but I think piping on top of molded and often even dipped pieces is so ugly.

Yeah, I was just being silly. Chocolates are not a finely-honed skill of mine so my best work would probably belong in this discussion... I'm saving my bad work for when they start the "Chocolates with that Igor's Dungeon finish" discussion.

It's kinda like wrestling a gorilla... you don't stop when you're tired, you stop when the gorilla is tired.

Link to post
Share on other sites

Cracked shells and missing outer layers is too critical? Both items would be completely unsellable.

Naaah... A little clever marketing ('hand-crafted!' 'exclusive, very limited edition!' 'heirloom style'), and jacking up the price to about 250% of the cost of the ones that came out right, would have these bad boys flying out the door. There's one born every minute...

OK, OK, so you could sell them. That doesn't assuage the misery when, after spending hours making the damned things and thinking they were perfect, you go to pop them out of the mold and they leave behind the top layer of cocoa butter: believe me, I've done it, several times. It sucks. It's not over-perfectionism, it's failure. I throw them away.

  • Like 1

Chris Hennes
Director of Operations
chennes@egullet.org

Link to post
Share on other sites

Cracked shells and missing outer layers is too critical? Both items would be completely unsellable.

Naaah... A little clever marketing ('hand-crafted!' 'exclusive, very limited edition!' 'heirloom style'), and jacking up the price to about 250% of the cost of the ones that came out right, would have these bad boys flying out the door. There's one born every minute...

OK, OK, so you could sell them. That doesn't assuage the misery when, after spending hours making the damned things and thinking they were perfect, you go to pop them out of the mold and they leave behind the top layer of cocoa butter: believe me, I've done it, several times. It sucks. It's not over-perfectionism, it's failure. I throw them away.

Wybauw would recycle them into caramels - Black Devil's I believe they are called.

Link to post
Share on other sites

It's not over-perfectionism, it's failure. I throw them away.

This sounds a lot like me, though not particularly with chocolates because I just don't do them often. But the birds have had some fine cookie feasts over the years when baking at home because I got distracted and they got slightly more brown on the bottom than I could live with. I understand completely what you're saying, I just try my best to make light of it because they're getting tossed whether I call myself a dumbass and laugh or bang my head against the wall and get angry. :biggrin:

It's kinda like wrestling a gorilla... you don't stop when you're tired, you stop when the gorilla is tired.

Link to post
Share on other sites

Cracked shells and missing outer layers is too critical? Both items would be completely unsellable.

Naaah... A little clever marketing ('hand-crafted!' 'exclusive, very limited edition!' 'heirloom style'), and jacking up the price to about 250% of the cost of the ones that came out right, would have these bad boys flying out the door. There's one born every minute...

OK, OK, so you could sell them. That doesn't assuage the misery when, after spending hours making the damned things and thinking they were perfect, you go to pop them out of the mold and they leave behind the top layer of cocoa butter: believe me, I've done it, several times. It sucks. It's not over-perfectionism, it's failure. I throw them away.

Wybauw would recycle them into caramels - Black Devil's I believe they are called.

You could sell them at a reduced price as irregulars/seconds. I know at least one chocolate shop that does this and they seem to sell really well.

Link to post
Share on other sites

Wybauw would recycle them into caramels - Black Devil's I believe they are called.

Good point! I guess with a single flavor you could just add a bit of cream and a bit more flavoring to make up for the additional chocolate in the shells, and use that as the filling for the next batch. I'll try to remember that next time catastrophe strikes. Usually my first impulse is to throw the rejects against the wall :laugh:

Link to post
Share on other sites

. . . .

OK, OK, so you could sell them. That doesn't assuage the misery when, after spending hours making the damned things and thinking they were perfect, you go to pop them out of the mold and they leave behind the top layer of cocoa butter: believe me, I've done it, several times. It sucks. It's not over-perfectionism, it's failure. I throw them away.

With you on the misery. Except I can't even bring myself to throw them away, because when I was a kid, all the old people around me taught that waste is evil, so I'm stuck looking at my failures for days, until the last one has been ingested.

  • Like 1

Michaela, aka "Mjx"
Manager, eG Forums
mscioscia@egstaff.org

Link to post
Share on other sites

Great thread. I wish I'd taken some pictures of the cherry cordials I made at Christmas. About half of the shells got hairline cracks and I ended up with chocolates covered in tiny pink globules of crusty sugar.

Link to post
Share on other sites

Cracked shells and missing outer layers is too critical? Both items would be completely unsellable.

Naaah... A little clever marketing ('hand-crafted!' 'exclusive, very limited edition!' 'heirloom style'), and jacking up the price to about 250% of the cost of the ones that came out right, would have these bad boys flying out the door. There's one born every minute...

OK, OK, so you could sell them. That doesn't assuage the misery when, after spending hours making the damned things and thinking they were perfect, you go to pop them out of the mold and they leave behind the top layer of cocoa butter: believe me, I've done it, several times. It sucks. It's not over-perfectionism, it's failure. I throw them away.

Wybauw would recycle them into caramels - Black Devil's I believe they are called.

You could sell them at a reduced price as irregulars/seconds. I know at least one chocolate shop that does this and they seem to sell really well.

Most people LOVE a "bargain"!

Steve Lebowitz

Doer of All Things

Steven Howard Confections

Slicing a warm slab of bacon is a lot like giving a ferret a shave. No matter how careful you are, somebody's going to get hurt - Alton Brown, "Good Eats"

Link to post
Share on other sites
  • Similar Content

    • By Douglas K
      I made my fifth ever batch of chocolate over the weekend, a 45% milk chocolate. I did the usual warming of everything, and the batch started off without a hitch. After running 24 hours I got ready to cool the chocolate to temper, and the stone seemed awfully hot. Sure enough the chocolate was 147 degrees F. Normally it comes out at around 120. The chocolate seemed kind of thick, but this is my first batch as low as 45%, so not sure if that’s normal. The chocolate tempered just fine, and tastes fine for have gotten so hot. I’m wondering if I got a minuscule amount of water in the batch? I’m not sure how that would have happened, though thinking of everything ad nauseum I can think of possibilities. The ingredients themselves are all ones I’ve used before without issue, though first time with the roasted nibs, but they came from the same reliable source as all my other nibs. Just curious if anyone else has seen this happen.
    • By Wisper
      Hi, 

      I need to make portions of exactly 12g (=0.423oz) of truffle ganache. 
      These truffles will be packed in a cardboard box with the total weight written on the package - so I cannot mess up... 

      What solutions do you have to control the weight of the ganache for truffles?
      I tried to measure them on the scale but it's time consuming and not very reliable... 
       
      I bought a silicone mould - the cavities are too small and the ganache seems to stick to the mould.
       
      Have you tried to make your own shells for truffles?
      It's not very clear how many cm in the mould will translate in how many grams in the product....
       
      any suggestion will be appreciated.
    • By Douglas K
      I am new to chocolate, but have been a home cook all my life. I have been reading here for awhile as I go on my chocolate journey. I learn a lot from the things I read here, but I really don’t have a lot to contribute since I am such a novice, especially with chocolate, so I thought I’d share something light with the community to hopefully give you something fun to take your mind off of some of our intensity these days. Sunday I made my second batch ever of bonbons, and they’re made with my own chocolate, a lavender ganache filling with a little taste of salted caramel. I saw this little guy on top of one of my leaf bonbons offering to protect it from any renegade bugs as they sat on the counter. I love these little jumping spiders, and they’re welcome in my house any time. Cute little sucker who hung out for quite awhile. Anyhow, something lighter for your day.

    • By eglies
      Hello everyone. 
       
      Ive encountered some issues with my truffles. 
      I use truffle shells and have made a caramel recipe and it seems to be leaking. Any tips on what i should do?
       
      Attached is a photo to show a clear image of what i am describing!
       
      Thankss 😀
      IMG_6005.pdf
    • By Chris Hennes
      I'm making another cooking video, this time about a chocolate cake from The Geeky Chef Cookbook. And the frosting recipe is basically garbage: 1 stick of butter to 165 grams (1 3/4 cups!!!!) of cocoa powder. So in the video I need to say something along the lines of "A normal frosting recipe has more like XX cocoa powder per stick of butter." So can I get a quick spot-check here? For your preferred cocoa-powder-based frosting recipe, how much cocoa powder per stick of butter? I don't actually know how much I added in the end, the cameras were rolling so I just added cocoa and sugar until it tasted good!
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...