Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

drago

The Food Saver/Vacuum Sealer Topic, 2011 to Present

Recommended Posts

I want to be able to seal the original lids on the gallon jars.

Andie,

You may well be right. I have never seen the "universal jar sealer" because the website is defunct, but some of the descriptions I've seen of it refer to tape to seal a hole in the lid.

My search continues. I may have to invent what I need.

I got a Takaje vacuum sealer as a Christmas present; I think this might be the machine you are looking for.

http://www.takaje.it/?page_id=88

It comes with valves, which can be applied to jar lids, and the machine has an attachment for sucking the air out of the jars. They are also selling bottle plugs, and vacuum boxes, but I have no experience about those (yet).

It works very well, tough I have only been using if for a couple of weeks.

Hosting Team Note: See this extensive topic for discussion on the subject prior to 2011

Share this post


Link to post
Share on other sites

I'm glad you bumped this topic up. I got some info and forgot to post it.

One of my friends has a unit with the tubing attachment and bought a needle valve - he got it at a hobby store - which is like the things we used to use to inflate basketballs, etc.

It came with the fitting so he could attach it to the tubing and he just drills a tiny hole in the metal lids to admit the needle, surrounds the needle with the silicone sealer (food grade) vacuums it and withdraws the needle. He says that once the silicone has set, it is possible to open the jar, reseal and revacuum it without needing to add more sealant.

He says the sealant is made by Tundra.


Edited by andiesenji (log)

"There are, it has been said, two types of people in the world. There are those who say: this glass is half full. And then there are those who say: this glass is half empty. The world belongs, however, to those who can look at the glass and say: What's up with this glass? Excuse me? Excuse me? This is my glass? I don't think so. My glass was full! And it was a bigger glass!" Terry Pratchett

My blog:Books,Cooks,Gadgets&Gardening

Share this post


Link to post
Share on other sites

Drago,

Thanks, but that's not exactly what I'm looking for. It does look neat, though.

Andie,

That sounds interesting. I'll have to look for that. So, does he just poke through the sealant the next time he wants to seal the jar?


Tracy

Lenexa, KS, USA

Share this post


Link to post
Share on other sites

Drago,

Thanks, but that's not exactly what I'm looking for. It does look neat, though.

Andie,

That sounds interesting. I'll have to look for that. So, does he just poke through the sealant the next time he wants to seal the jar?

Yes, the silicone remains quite flexible so when the needle is withdrawn the vacuum in the jar sucks the soft silicone into the opening.


"There are, it has been said, two types of people in the world. There are those who say: this glass is half full. And then there are those who say: this glass is half empty. The world belongs, however, to those who can look at the glass and say: What's up with this glass? Excuse me? Excuse me? This is my glass? I don't think so. My glass was full! And it was a bigger glass!" Terry Pratchett

My blog:Books,Cooks,Gadgets&Gardening

Share this post


Link to post
Share on other sites

I want to be able to seal the original lids on the gallon jars.

Andie,

You may well be right. I have never seen the "universal jar sealer" because the website is defunct, but some of the descriptions I've seen of it refer to tape to seal a hole in the lid.

My search continues. I may have to invent what I need.

I got a Takaje vacuum sealer as a Christmas present; I think this might be the machine you are looking for.

http://www.takaje.it/?page_id=88

It comes with valves, which can be applied to jar lids, and the machine has an attachment for sucking the air out of the jars. They are also selling bottle plugs, and vacuum boxes, but I have no experience about those (yet).

It works very well, tough I have only been using if for a couple of weeks.

Hi Drago, welcome to eGullet! And thanks for the link, very interesting machine. Can you regulate the vacuum via the built-in external-vacuum-tube, as shown in my post on sealing liquids?

Some links on the takaje homepage do not work, so here are some useful links:

Takaje catalog

Valves for jar lids

Vacuum box

Bags at a reasonable price (100 pcs./package)

Video showing machine and accessories

Regards

Pedro


Edited by PedroG (log)

Peter F. Gruber aka Pedro

eG Ethics Signatory

Share this post


Link to post
Share on other sites

Hi Drago, welcome to eGullet! And thanks for the link, very interesting machine. Can you regulate the vacuum via the built-in external-vacuum-tube, as shown in my post on sealing liquids?

Regards

Pedro

I just tried bagging some water, and yes, your method works. Thanks for the tutorial. It is a bit tricky, as the tubing attachment must be lifted out from its holder to regulate the vacuum, but I am confident that with some practice one could get excellent results.

I have another idea concerning sous viding liquids - I wonder weather using a sealed and vacumed glass jar holding the liquid inside the cooker would work. The takaje valve would make this possible, and it would greatly simplify the sous viding of creme anglaise for instance, and the jar could be re used.

Also Pedro I have to thank you for suggesting a Weck canner for a possible vessel. Encouraged by you and Dougal's post about his experiences with his Lidl cooker

http://forums.egullet.org/index.php?showtopic=129877&view=findpost&p=1761768

I bought a Clatronic EKA 3338

http://www.idealo.de/preisvergleich/OffersOfProduct/2136208_-eka-3338-clatronic.html

which seems to be the same model, I have been using it in the last few days paired with a SousVideMagic 1500D, and the setup shows lots of promise indeed. I shall report about it in more detail in the sous vide equipment topic.

Regards:

drago

Share this post


Link to post
Share on other sites

Yes, the silicone remains quite flexible so when the needle is withdrawn the vacuum in the jar sucks the soft silicone into the opening.

Very cool. I will have to check it out.


Tracy

Lenexa, KS, USA

Share this post


Link to post
Share on other sites

The Takaje site links to some videos of their system, including this one:

Zowie! It's been too long for me to do the math to figure out how much vacuum that's pulling to get the water to boil as (somewhat above) room temperature. (I think that when the metal lid goes on, some condensation forms on the inside of the jar, which tells me that they are starting with something like hot tap water, not actually "room temp") I'd be sporting a lot of protective gear to do that with a normal glass jar, but it's still impressive - looks like flash pickling would be possible with that setup.

Anyway, let me ask the question that I'm sure others have thought: How hard would it be to make your own chamber system?

I've never played with a chamber system myself, but they don't seem to be terribly complicated. When you're running one of them all day in a commercial operation, having a "load, push the button, fill the next bag, swap out bags, push button, repeat" control system makes a lot of sense. But for a home user, turning a vac pump on and off manually, triggering the sealer manually, and opening a valve to flood the chamber manually isn't so bad.

So, if I understand correctly, we're talking about the following components:

The chamber itself, where it would be nice to have a clear top, with a convenient hinged action, which must seal against the base of the chamber. (sheet polycarbonate?)

You'd need to be able to clean out the interior of the chamber to keep things sanitary. (Would a heavy gauge stainless steam pan potentially work for the body? Would that risk crumpling under too much vacuum? Because the lid/chamber would not be bolted together, if it failed, it should not do so "spectacularly" - any crumpling would pull the pan away from the lid, breaking the seal quickly.)

Inside the chamber, some "props" could be useful, particularly for bagging liquids - but these are not absolutely necessary.

Inside the chamber, a sealing bar, with a way to trigger it from outside the chamber. The wiring feeding the sealer would have to run through the wall of the chamber, and if the chamber is metal, not short out. (If the chamber is metal, then grounding the chamber would be a good idea.) Plus, a pressure resistant seal around the wire penetration would be good. (Perhaps a tight hole and some well cured silicone might be adequate?) Amazon shows a wide variety of moderately priced "impulse sealers" for under US$100. From the previous thread on "foodsaver" type systems, the wider the seal the better - the cheap impulse sealers list widths in the range of 2mm to 6mm - that doesn't sound so great. Activating the sealer externally might be as easy and locking the trigger and only plugging the unit in when the vacuum level in the chamber is correct.

The vacuum pump itself, along with tubing to the chamber, and a release valve. Basic pumps seem to run US$120 to US$200. Higher capacity pumps will evacuate the air from a larger chamber faster, of course. A stand-alone pump could have other uses, from vac sealing mason jars with a lid-adapter to supplying the vacuum for a rotary evaporator.... mwahahahahahahah!!! (oh, dear... was I twirling my handelbar moustache just then?)

Ideally, a gauge to display the "amount" of vacuum in the chamber would be good - it might be easy to mount it through the lid.

Does anyone know what level of vacuum a "standard" chamber vac pulls, or what level is needed for flash pickling or some of the Keller "Under Pressure" techniques?

Clearly I'm proposing a Franen-appliance hack, but compared with US$1000 and up, for a non-commercial system, this might work for exploring some actual sous vide techniques...

Share this post


Link to post
Share on other sites

In this video the water temperature must have been 60°C or above, as the Takaje Deluxe is specified to pull 80% vacuum (the Takaje T-43 Pro would pull 90%, it would boil at 46°C). See my table and a post in the main SV topic.

I wonder what sort of stand-alone pump would be required for the 99.9% vacuum that you find in the chamber vacs?

Share this post


Link to post
Share on other sites

I am really regretting not just buying this in the first place and instead plunking down $400 for the weston pro-2300

My one concern is that you do have flexibility to do bigger bags with the side sealer (I can do a whole primal in mine).

Share this post


Link to post
Share on other sites

I am really regretting not just buying this in the first place and instead plunking down $400 for the weston pro-2300

My one concern is that you do have flexibility to do bigger bags with the side sealer (I can do a whole primal in mine).

That's the one thing I'll miss about my Weston. The 16 inch sealer bar is nice.


Larry Lofthouse

Share this post


Link to post
Share on other sites

I posted this in the other thread as well, but I think they are essentially selling a $150 decal that says Sous Vide Supreme

http://www.qualitymatters.com/VacMaster-Chamber-Vacuum-Sealer-VP112-by-ARY-p/qmar-vp112.htm

I tried to find the "other thread" but failed somehow. Does anyone have this unit? It seems to be considerably cheaper than any other chamber sealer out there which makes me nervous. I don't use my sealer all that often but it would be nice to seal wet things without much fuss.

Share this post


Link to post
Share on other sites

I've got a Weston Pro-2300 edge vacuum sealer. Although it has a manual seal button, I've never been able to get a good vacuum and seal for bags that have any significant volume of liquid (e.g.short ribs in a brine for pastrami). Either I would press the seal button too fast and not get a good vacuum, or I'd wait too long and liquid would enter the vacuum area and prevent the seal. Normally in a case like this, I would revert to the low-tech displacement technique using a ziploc bag and a container of water.

The other day, I tried a new approach: I submerged a vacuum pouch containing the ribs/brine into the water bath, displacing all air. Then, with the Weston right up next to water bath I inserted the unsealed end of the pouch just over the seal bar, but not actually into the vacuum area. This let me use the Weston effectively as a impulse sealer. I got a high quality seal, no air in the pouch and no liquid in the Weston! I repeated a few times to get mulitple seals for a 72H sous vide session. Here's a shot of one of the bags at about 40H.

photo.jpg

Share this post


Link to post
Share on other sites

Sealing liquids or leftovers using an edge sealer

Modernist Cuisine 2•219 describes a trick to fill liquids into a vacuum bag, about like this:

gallery_65177_6916_74190.jpg

(in Nathan's picture the size of bag and container are more congruent)

I have described earlier how to seal liquids using an edge sealer.

Here is a video showing the trick:

Using a large bag and flattening the contents minimizes chilling / freezing / thawing / heating times:

gallery_65177_6916_72463.jpg

@Borgstrom:

The Weston Pro-2300 edge vacuum sealer seems to lack an auxiliary port for evacuating rigid containers; this makes sealing liquids a lot more tricky. Suppose you want the liquid in the bag to rise no more than 50mm, this is 50mm water column or 3.68mmHg or 0.0049 bar or roughly 0.5% vacuum. Edge sealers usually pull 80% vacuum, and I doubt you can set the vacuum limit as low as 0.5%. I am glad you found an alternative trick.


Peter F. Gruber aka Pedro

eG Ethics Signatory

Share this post


Link to post
Share on other sites

@Borgstrom:

The Weston Pro-2300 edge vacuum sealer seems to lack an auxiliary port for evacuating rigid containers; this makes sealing liquids a lot more tricky.

It has two ports in the vacuum area - one for the vacuum suction, the other for the vacuum sensor. The vacuum suction port can be used for accessories - I have tried it a few times to do things like make aerated chocolate, but not for sealing liquids. I eventually got a cheap impulse sealer (about $40 online) to make my liquid sealing a bit easier. Some day I'll have to go all the way and get a chamber machine....

Share this post


Link to post
Share on other sites

Interesting that it's not retort-pouch compatible: anyone know why not?

Chris, I just came across your post, and see that no one has responded to it.

There are basically two problems with a retort pouch. The first is that such pouches don't have the waffle construction that is necessary to allow the air to escape, and for that reason they cannot be used on the outside of a chamber vacuum, or with an edge sealer. (I recently bought some 8" x 18" pouches used for whole fish filets. It wouldn't fit inside my Minipack MVS31X without doubling it over, or trimming it.)

Now, the Sous Vide Supreme machine isn't an edge sealer, so that shouldn't be a problem. But the other problem is that retort pouches are about 7mm thick, and typically have a gold-colored metallic foil to different them from bags intended for use at lower temperatures. For that reason, it takes a lot more heat, or a longer time, to get a good seal.

In my case, Doug at Doug Care Equipment recommended that I increase the seal time on my machine from the normal 2.5 seconds up to the full 4 seconds when using a retort pouch.

The first time I tried it, I was trying to seal a beef tongue with 500 ml of water, which really stretched the limits of my machine. I must have gotten some water on the seal area, because it didn't seal at all. So I wiped it dry and tried it again, and this time the seal held. (I had forgotten that I had some 10" x 13" 3 mil boilable bags, which was why I was using the retort pouch. I didn't really need to, since I wasn't going to be canning the meat.)

So although I don't have the Sous Vide Supreme/Vacmaster sealer, and haven't read the instruction manual, I suspect that it doesn't have a way to increase the seal time, or else the seal bar doesn't get hot enough to seal a retort pouch.

One other thing to consider is that the Vacmaster uses a dry pump, whereas the Minipack and Henkle units use an oil pump. There are pros and cons -- the dry pump is less likely to have a problem if a fluid starts boiling within the chamber as a result of pulling too hard a vacuum, but on the other hand, I suspect it will wear out more quickly than an oil pump.

I'm very happy with my unit, but it WAS expensive.

Bob

Share this post


Link to post
Share on other sites
One other thing to consider is that the Vacmaster uses a dry pump, whereas the Minipack and Henkle units use an oil pump. There are pros and cons -- the dry pump is less likely to have a problem if a fluid starts boiling within the chamber as a result of pulling too hard a vacuum, but on the other hand, I suspect it will wear out more quickly than an oil pump.

Just to clarify, there are many Vacmaster chamber sealers that have oil pumps (including mine - the VP215). They're more expensive than the dry pump versions (just over $1000), but still a *lot* cheaper than anything by Minipack or Henkle.

Share this post


Link to post
Share on other sites

What other options are available for less than $150? I am fine with commercial or consumer models.


"Salt is born of the purest of parents: the sun and the sea." --Pythagoras.

Share this post


Link to post
Share on other sites

They following two seem to have pretty much the same features and be in the same price range (in the UK)

  • Food Saver Vacuum Sealer - approx £120
  • SousVide Supreme Vacuum Sealer - approx £100

I would welcome any advise in helping me choose one over the other. Is there anything to distinguish them in terms of ongoing costs for vacuum rolls/pouches etc?

Share this post


Link to post
Share on other sites

  • Similar Content

    • By kostbill
      Hello.
      I would like to buy some pectinex ultra sp-l.
      However I am worried about the temperature during the shipping time.
      I read that the storage temperature should be between 2 and 8 C. It works best from 15 to 50 C, and if it stays a lot of time in 25 C, it will gradually be deactivated.
       
      It needs a week to come here (Greece), then will it affect its abilities?
       
      Do you know if I can find a document somewhere that explains the gradual loss of power as a function of time and temperature?
      Did you have any experience with pectinex not working well due to bad storage?
       
      Thanks.
    • By Galchic
      Hello, folks, thanks for reading.
       
      My husband thinks, I should start selling my popcorn seasonings (which I make for my family), it’s a good product. But I'm not sure if it’s interesting to other people... So, what do you think, guys?
       
      Our story: 
      We’ve bought an air popper machine, but popcorn came out pretty tasteless. Then, we’ve bought different “popcorn seasoning” mixes... But it always ends with all the seasoning at the bottom of the bowl. Then, we've added butter, oil and so on before seasoning...  we got soggy, chewy popcorn. Lot’s of disappointments…
       
      When we almost gave up… the magic happened! I figured out the way to make seasonings that:
      Stick to popcorn, but not sticky to fingers (or T-shirt  , Easy to apply, May be pre cooked in bulk and stored… And popcorn appears crunchy, tasty, thoroughly covered with seasoning.  
      Sounds good, yep? Now, when I want to treat myself  - I only need 2 mins to turn tasteless popped popcorn to a real treat.  
      The only moment - it request 1 extra effort: after you toss it over popcorn, you need to microwave it for 1 min, and stir after.
       
      So, I was wondering, if you like popcorn like myself - would this seasoning be interesting for you to purchase? Are you ready for a little extra work (microwave & stir) in the goal to flavor popcorn, or it feels too much effort?
       
      As I have no experience in manufacturing and retail, your answers would help me to make a very important decision - to dive in or not... 
       
      Thanks in advance for your answers, it means the world to me.
       
    • By lindaj1
      Is there any recipe from the modernist universe or any other galaxy to make ketogenic (low carb) puff pastry and strudel type doughs?  Unusual ingredients OK.  There must be a way...
    • By haresfur
      I got to thinking after the disgusting job of separating globs of fat from sous vide short ribs and debating never doing them that way again. If the fat renders out in a braise, but not in the sous vide, what temperature would you need to turn the fat liquid to get rid of it? Is it below well-done or do you really have to cook the shit out of it? Is it just temperature or a time&temperature thing?
       
      Along those lines, what happens with marbled, tender cuts? where is the sweet spot between solid fat and something more palatable?
    • By Daily Gullet Staff
      By John Sconzo

      The Daily Gullet is proud to present this, the first in a multi-part, front-row report on the recent "Spain and the World Table" conference. Watch for subsequent installments in this topic.

      In his introduction of Ferran Adria, Thomas Keller -- perhaps the most celebrated American chef ever -- described four elements that go into making a great chef. The chef must be aware. Once aware of one’s culinary and other surroundings that chef can then be inspired, which leads to the ability to interpret those surroundings. But a great chef does not stop there. Instead, the great chef continues to evolve. Ferran Adria, perhaps more than any other chef who has ever lived, is the embodiment of those four elements.

      The moment that Ferran Adria strode towards Thomas Keller on the stage at the CIA/Greystone’s World of Flavors’ “Spain and the World Table” Conference was electric -- as if a giant Van de Graf generator had been turned on. The feeling didn’t subside when Adria took the stage from Keller; it only became more pronounced as the packed crowd rose to its feet, raining applause, admiration and love on the Spanish master. Adria accepted the response with aplomb, and gave it right back to the audience -- and to his fellow Spanish cocineros, who were standing off to the side. He brought each one up to join him on the stage for a rousing thank-you to the conference organizers, sponsors and participants. Once this emotional release subsided, Adria got down to what everyone had been waiting for -- his discussion and demonstration.

      Ferran Adria, with eyes sparkling like the finest cava, began speaking Spanish in a voice as gravelly as the beaches of the Costa Brava, while Conference Chairman Jose Andres translated. The crowd, hushed and straining for every word, moved forward in their seats as Adria explained El Bulli and himself, with a lesson in recent culinary history thrown in. Ferran explained that El Bulli is not a business. While offshoots of El Bulli are operated on a for-profit basis, the restaurant runs without profit as a primary motivation. For example, he said, the greatest difficulty they have is distributing reservations. Given the extraordinary demand and the severely limited supply, he explained that they could simply raise the price of a meal to the point where the supply and demand met. Indeed, the price of a meal at El Bulli is in itself quite reasonable given the stature of the restaurant and well within means of most motivated diners should they be able to get there, and this is how Adria prefers it. He stated that he was not interested in cooking solely for those with the most money. He prefers to work for people with a true interest in exploring the limits of cooking with him. To this end he showed a short film depicting “A Day in the Life . . .” of El Bulli set to the Beatles’ song of the same name. The film showed a couple’s response to the experience.

      Ferran’s voyage into creativity began with a visit to Jacques Maxima at Le Chanticleer Restaurant in Nice, France. He learned from Maxima that to be creative is not to copy. This idea changed his entire approach to cooking -- from making classic cuisine to making his own. Aware of elaborate books of French cuisine, Adria resolved to catalogue his work, the results of which are the richly detailed El Bulli books, published by period. These books, as wonderful as they are, are huge and extremely expensive. During his presentation, Adria announced -- and demonstrated -- that the individual dishes photographed and described in a chronology within each book are all now available online at elbulli.com.

      He finished the philosophical discussion by talking about the general style of haute cuisine that he and others are engaged in. While others have coined the term “molecular gastronomy” to highlight the scientific component of the creativity involved, Adria rejected it, saying that all cooking is molecular: most of his techniques are in fact rather simple and don’t employ radical new technology. Most of the technology that they do use has been around for some time; they have simply adapted it to their own purposes. Nevertheless, he applauds contributions to gastronomy from Harold McGee and other food scientists, and welcomes their collaboration in the kitchen. He has yet to find a term that describes the movement: as of now, he feels that there really is no good name for this style of cooking.

      More than any other single thing, Ferran Adria is known for the use of “foams” in cooking. While he is proud of his achievements with foams, he stressed that while appropriate in some circumstances, the real utility of foams is limited. He bemoans their ubiquity -- and wishes to not be blamed for others’ poor deployment of the concept. In the course of describing this and other techniques, Adria made a point of stating that using them should not be inferred as copying. Techniques and concepts are to be used and shared. He invited everyone to learn and harness whatever they found interesting, and to employ it in to their own pursuits.

      Another set of techniques discussed and demonstrated by the master and his assistant, Rafa Morales from Hacienda Benazuza, included three types of spherification. These included the use of calcium chloride (CaCl) and sodium alginate as well as the converse, and exploration of a new agent, gluconodeltalactone. The original combinations of alginate into CaCl for “caviar” production, and CaCl into alginate for larger “spheres” have chemistry-related limits as to what can be sphericized. In private correspondence, Harold McGee explained to me that Adria described encapsulating a mussel in its own juice. While this would make the dish technically an aspic, unlike conventional aspics it remains a liquid. Adria said that though gluconodeltalactone is very new, and they are just beginning to get a handle on it, he is very excited by it. He also demonstrated a machine for spherification on a larger scale than they had originally been able to do, as well as liquid nitrogen and freeze-drying (lyophilization) techniques. At the conclusion of his demonstration -- and thus the Conference -- the audience once again awarded him a standing ovation.

      While Adria’s appearance was the culmination of the conference, the energy it produced was not just because of his stature in the world of gastronomy -- it was also due to the excitement generated by the conference that preceded it. If there had previously been any doubt, Thomas Keller’s welcome of Adria was a clarion: Spanish cuisine has landed on North American shores and is finding a niche in the North American psyche. Spanish cuisine -- in its multifaceted, delicious entirety -- lives here, too.

      + + + + +

      John M. Sconzo, M.D., aka docsconz, is an anesthesiologist practicing in upstate New York. He grew up in Brooklyn in an Italian-American home, in which food was an important component of family life. It still is. His passions include good food, wine and travel. John's gastronomic interests in upstate northeastern New York involve finding top-notch local producers of ingredients and those who use them well. A dedicated amateur, John has no plans to ditch his current career for one in the food industry. Host, New York.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...