Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create an account.

Sign in to follow this  
mamster

Making good bread

Recommended Posts

mamster   

It wasn't the first time I'd made bread, but it was the first time I'd made good bread. Recently I was asked to test a recipe for an upcoming book, for a Flute Gana-type loaf, with a poolish starter and some cornmeal in the dough. I followed the recipe, formed the loaves, baked on a stone, and out came the same disappointing bread I've always made: looked fine, perfectly edible, but bland. I was about to conclude that all the books claiming you could get good rustic bread out of a home oven were bogus.

But I was determined to give it another shot, so I turned to The Bread Baker's Apprentice. It has a Pain a l'Ancienne recipe that promises great results. It seemed too simple to work at all: it's a straight dough, with no starter or sponge (this is very uncommon in modern bread books), and after retarding overnight, you shape the loaves and pop them in the oven without even proofing. It's an extremely wet dough, and the best I could do was shape it into some flattish baguettes. The recipe does call for generating as much steam in the oven as possible, which I did by pouring hot water into a heated cast iron skillet and also using a spray bottle.

About 22 minutes later, out came some gorgeously brown, if misshapen, loaves. Somehow I forced myself to let them cool completely before diving in. I couldn't even believe what I was eating at first. Was Laurie playing a trick on me, substituting some bread from Dahlia or Grand Central? No, this was my ugly bread. The crust to crumb ration was a little high, but that's the worst thing you could possibly say about this loaf. The crust was crisp, and loaded with flavor, and I got great gelatinization through the crumb, leaving it moist with irregular holes.

If you're chary of homemade bread, like I was, try this recipe. You could mix up the dough tonight and pop it in the fridge, then bake the bread tomorrow morning. Now, if you'll excuse me, I'm off to buy a pound of yeast.

Share this post


Link to post
Share on other sites
mamster   

Sounds great, jackal. I've been wanting to experiment with sourdough, so I may well try your recipe next.

Share this post


Link to post
Share on other sites
jackal10   
Sounds great, jackal. I've been wanting to experiment with sourdough, so I may well try your recipe next.

I know I'll regret this, but if anyone wants sourdough starter then pm or email me with their snail mail address and, given time, I'll culture some and send it.

I find the easiest way to ship is is as a dryish dough. Crumble it into water, add an equal amout of flour and leave in a warm (85F) place until it bubbles - 8 hours or so, then refresh it a couple of times and you are away....

The history of this particular starter was that it was collected by a friend of ours some years ago in a vinyard near Sonoma, CA. Its fairly vigourous and quite mild.


Edited by jackal10 (log)

Share this post


Link to post
Share on other sites

Hey mamster, I have a tangential question for you: when I made my batch of bread, I was afraid to use a cast iron pan for steaming since I was afraid throwing the water in a hot skillet would remove the season and encourage rust, or even warp the pan. Did any of this happen to your cast iron pan?

Share this post


Link to post
Share on other sites
FoodMan   

That is great mamster, I've made this bread several times from the Bread Baker's Apprentice book and it is fantastic. I even use a very similar recipe-with Olive Oil added and a bit less wet- to make pizza dough. Retardation does give great results.

Jackal I should be trying this recipe this week.

FM

Share this post


Link to post
Share on other sites
mamster   

Nightscotsman, I warped one of my aluminum pans last time I did this, so I figured cast iron would be hardier. It didn't seem to affect the seasoning. To prevent rust, I took the pan out about halfway through baking, poured out the remaining water, and rubbed it with oil.

Share this post


Link to post
Share on other sites
elyse   

The history of this particular starter was that it was collected by a friend of ours some years ago in a vinyard near Sonoma, CA.  Its fairly vigourous and quite mild.

That is very cool jackal. I have a ton of starter too, but it's not that old, and not that cool. Have you frozen yours?

Share this post


Link to post
Share on other sites
jackal10   

That is very cool jackal.  I have a ton of starter too, but it's not that old, and not that cool.  Have you frozen yours?

I find starter doesn't freeze well, but keeps almost indefinately in a closed jar in the fridge. I guess freezing can rupture and damage the yeast cells.

Adding packet yeast is a waste of time - the environment is so acid and the wild yeast so strong and in such abundance that the package yeast will not compete.

It separates into two layers, but they just get stirred back in. The yeast goes dormant (I think there is a technical term). Adding more food (flour) and warming up and it springs back into life, even after a year or so.

I should add a reference to Sourdoughs International an enthusiast who sells many and strange varieties. Interesting book as well.


Edited by jackal10 (log)

Share this post


Link to post
Share on other sites
elyse   

I have most of my starter in the fridge, and some tests in the freezer. Just wanted to know if I should abort trial.I'll take some out eventually and feed it. Can't hurt.

Share this post


Link to post
Share on other sites
KyleW   
Nightscotsman, I warped one of my aluminum pans last time I did this, so I figured cast iron would be hardier.  It didn't seem to affect the seasoning.  To prevent rust, I took the pan out about halfway through baking, poured out the remaining water, and rubbed it with oil.

I have sacrificed a 1/2 sheet pan. I leave it in the oven all the time. I find that it's easier to aim for than a skillet. I also think that because of the larger surface area you generate more steam initially than with a skillet. I pour 1 cup of hot water onto the pan just after loading the loaves. This amount (from Peter Reinhart) evaporates during the first 10-12 minutes of baking. Steam hanging around after this can wreak havoc with good crust development.

Just one man's opinion.

Share this post


Link to post
Share on other sites
jackal10   

I agree with the pan in the oven, but load it with bricks or quarry tiles or pig iron - something that can hold the heat. Preheat as hot as it will go. Its the burst of superheated steam at the beginning you want.

I have an Aga with a cast iron oven. I throw a cup of water in after loading the loaves, and slam the door.

The steam stops after about a minute. In the big wood-fired outdoor oven, mopping the floor with a wet mop, or throwing in a cup of water has a similar effect, - the steam is over after a minute, and the surface of the dough shiny and gelatanised.


Edited by jackal10 (log)

Share this post


Link to post
Share on other sites
KyleW   
I agree with the pan in the oven, but load it with bricks or quarry tiles or pig iron - something that can hold the heat.

I have a HearthKit.

Share this post


Link to post
Share on other sites
elyse   

You could also use a good grill pan which will have more surface space.

Share this post


Link to post
Share on other sites
Nightscotsman, I warped one of my aluminum pans last time I did this, so I figured cast iron would be hardier.  It didn't seem to affect the seasoning.  To prevent rust, I took the pan out about halfway through baking, poured out the remaining water, and rubbed it with oil.

I have sacrificed a 1/2 sheet pan. I leave it in the oven all the time. I find that it's easier to aim for than a skillet. I also think that because of the larger surface area you generate more steam initially than with a skillet. I pour 1 cup of hot water onto the pan just after loading the loaves. This amount (from Peter Reinhart) evaporates during the first 10-12 minutes of baking. Steam hanging around after this can wreak havoc with good crust development.

Just one man's opinion.

That's an excellent approach. I use an old cast iron skillet, a large (14") pizza tile, and ice cubes. Skillet in the lower shelf of the oven, tile in the middle.

The usual mix is 85% King Arthur bread flour, with the remainder divided among rye, whole wheat, spelt, bran, nuts, cereals, etc. A touch of salt or soy sauce is the remainder. The bread is lightly brushed with olive oil, and dusted with cornmeal.

I preheat the oven to 500F for 30 minutes, reduce to 400F, add the scored bread directly to the stone, toss 3-4 ice cubes onto the skillet, and the steam continues for 4-5 minutes.

Cook time is about 32 minutes, until the internal temp is 195 degrees

The usual result is a very puffy, golden brown, relatively light loaf with a very thin crust.

Share this post


Link to post
Share on other sites
kcd   

I have a slightly different question. DH is getting serious about making bread. Things are coming along just fine on most fronts. Except one. When he makes ciabatta (from the Baker's Apprentice) he isn't able to get the large, irregular, lovely holes.

Any ideas to think about when trouble shooting the next time? It seems like he is following directions. He is using the poolish version.

:unsure:

Any hints will be appreciated.

kcd

Share this post


Link to post
Share on other sites
rickster   

I think in Carol Field's The Italian Baker she suggests that a very wet dough is crucial to getting large holes, almost "uncomfortably" wet. So you might try more water than called for in the directions, or kneading in less flour.

Share this post


Link to post
Share on other sites
KyleW   

This dough needs to start out as more batter than dough. Initially it should be just about impossible to handle. Through the turning process it will eventually become marginally handleable. Use lots of bench flour, rather than adding flour to the dough. Ciabatta means slipper in Italian. It gets its name from the shape it takes on. The shape results from the inability to really shape the dough.

Share this post


Link to post
Share on other sites
FoodMan   
I have a slightly different question.  DH is getting serious about making bread.  Things are coming along just fine on most fronts.  Except one.  When he makes ciabatta (from the Baker's Apprentice) he isn't able to get the large, irregular, lovely holes. 

Any ideas to think about when trouble shooting the next time?  It seems like he is following directions.  He is using the poolish version.

  :unsure:

Any hints will be appreciated.

kcd

wetter dough, longer fermentation time would be my suggestion. When making the same Ciabatta you are talking about I try to get it as wet as possible and still be able to handle it. Following the exact directions and fermentation times in the book might not give best results due to the fact that humidity and other conditions affect how wet you need to make your dough. Hope this helps.

FM

Share this post


Link to post
Share on other sites
elyse   

Are you kneeding/mixing by hand or a mixer? Holes in the crumb are a sign of high hydration, and this is easiest (I think) with a mixer. You can also let the dough sit in the mixer for 10 - 15 minutes so it will absorb even more water, then mix again. Again, do this befor adding salt, because salt will inhibit the absorbtion.

Less flour in the dough, more on the bench and on top.

Share this post


Link to post
Share on other sites
jackal10   

I agree - its more a batter than a dough.

The other thing is *very* gentle handling after first rise so as not to knock out the gas.

You might find using softer flour (like ordinary cake flour) helps.

Share this post


Link to post
Share on other sites
elyse   

Adding to what jackal is saying, you'll want to cut the dough into loaves to keep the air structure, and pull them gently to shape. You might want to move them onto the stone (or wherever) with a bench scraper or spatula to disturb it even less, and turn it like a pancake to cause the least distress.

Although I do have to disagree on the cake flour thing. Not enough gluten.

Share this post


Link to post
Share on other sites
kcd   

Thanks guys. I had thought it might be a moisture thing. DDH was concerned about it. The first time he tried to knead it by hand. 2nd time, it was a mixer. The flavor is good. The crust is good. Just too much flour. (Right now he is using an organic, high protein flour).

I look forward to the new results this weekend. :biggrin:

Share this post


Link to post
Share on other sites
donk79   

Making bread...

I've been putting ingredients in a bread machine for a couple of years now. Just this evening, i decided to play around a little bit, and after doing my standard toss ingredients in the bread machine, I started to prep some dough outside the machine. I used the bread machine recipe as my base (1 1/3 cups water, 4 cups flour, 1 tsp sugar, 1 1/2 tsp salt, 2 tbsp olive oil, 1 1/2 tsp yeast) and then adjusted for consistency and added ground pepper and dillweed. let rise for an hour. Punched down, kneaded for a couple minutes, then set on a floured baking stone in the oven at 400. I just went down to glance in the oven. It resembles nothing more than a mushroom. top crust set, then continued to rise. I wish I had a digital camera so I could post a picture. live and learn I guess, though i'm not certain what i could have done to cause this. It will be quite a novelty if i can repeat it.

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Similar Content

    • By pastrygirl
      I was cooking for a party last night at which a gluten free cake was served for dessert.  I had a few bites and aside from the cake being dry and the frosting very sweet, there was that tell-tale grittiness that GF baked goods seem to have. This particular bakery uses a blend of millet, sorghum, tapioca and potato flours.  I used some Bob's Red Mill GF flour to satisfy a customer request for GF shortbread and found the same grittiness - they use garbanzo bean flour, potato starch, whole grain white sorghum flour, tapioca flour and fava bean flour. 
       
      Obviously some sacrifices of flavor and texture are made when trying to replicate the magic of gluten, but why can't these flour blends be softer?  Can't they be milled more finely?  Or is it just the way the particular starches or proteins in those other flours are felt on the tongue? 
       
      It's like that chalky cold cooked rice texture, do you know what I mean?  Why can't it be better?  Almost every time I eat something made with substitute flours, it makes me sad and want to fix it.
    • By Kasia
      Today I would like to share with you a recipe for a slightly different sandwich. Instead of traditional vegetables, I recommend strawberry salsa, and rather than a slice of ham – a golden grilled slice of Halloumi cheese. Only one thing is missing – a fresh and fragrant bread roll.

      Halloumi is a Cypriot cheese made with sheep's milk or a mixture of sheep's, goat's and cow's milk. It is semihard and so flexible that it is excellent for frying and barbecuing, and it is great fresh too.

      Ingredients (for two people)
      2 fresh rolls of your choice
      2 big lettuce leaves
      4 slices of Halloumi cheese
      2 teaspoons of butter
      salsa:
      8 strawberries
      half a chili pepper
      2 tablespoons of minced peppermint leaves
      ¼ a red onion
      2 tablespoons of chopped almond without the skin
      1 teaspoon of honey
      2 tablespoons of lemon juice
      2 tablespoons of balsamic sauce

      Start by preparing the salsa. Wash the strawberries, remove the shanks and cube them. Dice the onion and chili pepper. Mix the strawberries with the onion, chili pepper, peppermint and almonds. Spice it up with honey and lemon juice. Leave in the fridge for half an hour. Grill the slices of Halloumi cheese until they are golden. Cut the fresh rolls in half and spread them with butter. Put a lettuce leaf on each half of roll, then a slice of the Halloumi cheese, one tablespoon of salsa, another slice of cheese and two tablespoons of salsa. Spice it up with balsamic sauce. Cover with the other half of the roll. Prepare the second sandwich in the same way. Serve at once while the cheese is still hot.

      Enjoy your meal!
       
       
       


    • By Shel_B
      Not sure if the subject line really reflects the situation and my question.
       
      Sweetie made a couple of loaves of soda bread the other day, and cut the top of the loaf in order to make a pattern something like THIS.  However, the pattern or cut mark didn't show on the finished loaf.  I don't know much more other than she said she made the cut "pretty deep."
       
      What might be the cause of the cut mark not showing on the finished loaf?  Thanks!
    • By nonkeyman
       How to Make Rye Sourdough Bread
      I don't know what it is about bread, but it is my favorite thing to make and eat. A freshly baked loaf of bread solves a world of problems. I was lucky enough to get to be one of the main bakers when I worked at the Herbfarm. We baked Epi, Baguettes, Rolls, Pretzels and so much more.
       

      Rye Sourdough Wood Oven Baked Bread
       
      My fondest memory when I worked there was our field trip to the Bread Lab(wait something this cool came out of WSU, of course!) here in Washington. They grow thousands of varieties of wheat and have some pretty cool equipment to test gluten levels, protein, genetics and so on. I nerded out so hard.
       
      What came out of that trip was this bread. Now I can't recall the exact flour we got from them, but using a basic bread and rye will do the trick. We used to get a special flour for our 100 mile menu. This was where we were limited to only serving food from 100 miles away. So finding a wheat farm that made actual hulled wheat in 100 miles was a miracle. The year before...the thing we made, was closer to hard tack.
       
      Now if you don't have a starter, I recommend starting one! It is a great investment!
       
      Rye Sourdough
      1000 g flour (60% Bread Flour, 40% Rye)
      25 g salt
       
      75 g of honey/molasses
      200 g of Rye starter 
      650 g of water, cold
      Equipment
      Baker Scale (or other gram scale)
      Bench Cutter
      Bread Razor (you could also use one of those straight razors)
       
      Start by taking the cold water, yeast and Honey and mix together and let sit for 10-15 minutes
       
      I know, some of you just freaked out, cold water? Won't that kill the yeast.
       
      Nope, the yeast just needs to re hydrate. I prefer using cold water to slow the yeast down. That way the lactobacillus in the starter has  a good amount of time to start making lactic acid, and really get to flavor town!
       
      While that is sitting, I mix the flour and the salt together(How many times I have forgotten to salt the bread).
       
      Now mix the two products with a kneading hook for 3-5 minutes, only until thoroughly mixed but not yet at the window pane stage of kneading.
       
       
      Instead, place into a bowl and set a timer for one hour. Then when that hour is up, push the dough down and fold all the corners in
       
      Repeat this step 2-3 more times, pending on the outside temperature.
       
      If you happen to have those cool bowls to shape round loafs! Awesome, use them. I would break the boules into 3 balls of about 333 grams
       
      If not then just put the dough in the fridge and do the steps below the next day.
       
       
       
       
       
       
       
      Once you have bouled the bread, can put it into the fridge and let it sit over night
       
      Again, this lets the bacteria, really get to work(misconception is the yeast adds the sour flavor, nope, think yogurt!)
       
      Now on the next day, heat up whatever form of oven you plan to use. We used a brick oven but if you just have a normal oven, that is fine. Crank it to 450 degrees Fahrenheit.
       
      If you have not bouled your bread yet, go back and watch the video and break the dough down into three balls of abut 333 grams. Then place the balls on a lightly greased sheet pan. Let sit for about 45 minutes to 1 hour.

      If you have used the fancy bowls then turn the the bread out on a lightly greased sheet pan, without the bowl and let temper for 15-30 minutes.
       
       
      If your oven is steam injected, build up a good blast of steam.
       
      If not, throw in a few ice cubes and close the door or put a bath of hot water inside.
       
      The steam is what creates the sexy crust!
       
      Let it build up for a few minutes!
       
      Right before you put the bread into the oven use a bread razor to slice the top of the bread.
       
      Place the dough balls into the oven and douse with another blast of steam or ice and close the oven.
       
      Let them bake for 13 minutes at 450 degrees. Then turn the loaves and bake for another 10 minutes.
       
      Remove when the crust is as dark as you want and the internal temperature exceeds 190 degrees Fahrenheit.
       
      Now pull out and make sure to let cool off of the sheet pan with room to breath underneath. You don't want your crust steaming!
       
      Now here is the hardest part, wait at least 20 minutes before getting into the bread. Also, cutting into bread to early really seems to come out poorly. I would rip the bread until 1-2 hours has passed.
       
      Now serve it with your favorite butter, goat butter or whipped duck fat!
       
    • By Catherine T
      Hi, I have just discovered and registered on this site. My main cooking and baking concern is that I have been diagnosed with Celiac Disease and haven't been able to eat gluten. BUT I have discovered an exception. When I have visited Continental Europe such as Spain and Russia, I have been able to eat their bread and have had no negative repercussions. Then when I try eating bread in Great Britain and North America I have become sick. My research on the Web has not provided any explanations although I believe the EU has banned GMO grains. I was recently gifted panetonne from a Toronto restaurant called Sud Forno that uses Italian flour and I was able to safely eat it. Another bakery called Forno Cultura advertises that it uses European flour. So I am going to approach them to see if I can buy their flour in bulk. I will let you know how it goes.
  • Recently Browsing   0 members

    No registered users viewing this page.

×