Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

Damaged marble board


Kahrs

Recommended Posts

Sigh.  We rented out our house and I quickly discovered that the tenants used a knife on my pastry board and it is cut all over.   I hope I can use some sort of polishing agent to grind down the surface.  Any suggestions?

 

As a postscript, I guess I have to warn future house occupants that marble is a soft stone and ruins the knife as well.  Sigh.

 

 

Link to comment
Share on other sites

Well, marble being soft does have the advantage of making it easy to polish, so there is that anyway. Small comfort, I know. Pretty much any polish is going to get the job done eventually, but you may consider investing in an electric buffer (I have this Black & Decker model) unless you really enjoy scrubbing. 

Chris Hennes
Director of Operations
chennes@egullet.org

Link to comment
Share on other sites

I had an 18" x 18" marble square set into a remodeled kitchen counter and was astonished at how many people thought it was a cutting board! I used it for candy and pastry.  I think it depends on the depth of the cuts and would call a marble guy to see what they have to say. Unfortunately I do not hold out much hope...

Link to comment
Share on other sites

For effective stone polishing/repairs you need these:

 

1. http://www.ebay.com/itm/Diamond-Polishing-Pads-7-inch-Wet-Dry-28-1-Piece-Granite-Stone-Concrete-Marble-/221957874621?hash=item33adb863bd:g:D-8AAOSwkZhWSZ3S

 

2. An angle grinder.

 

For deep cuts/chips, polishing will not work. Get granite & marble acrylic kit/compound (ebay, Amazon).

Yes, money! but you will need to do this again and again and again in the future.

 

dcarch

Link to comment
Share on other sites

Hi, I once had the very same problem but with an entire (rather large) master bathroom white marble countertop.  It was not only scarred, but stained as well. I called a professional marble installer and to my amazement, he restored the entire countertop to "like new" condition in just a few hours. It was not terribly expensive but the cost was born by the renters via a reduction in the deposit. (From experience, I've learned to take extensive "before and after" photos to prove damage caused by renters -  don't even get me started on the renters who somehow cracked numerous ceramic floor tiles in another property).  Good luck, I'm confident that you can get your counter restored :)

Edited by kbjesq
clarification (log)
  • Like 1
Link to comment
Share on other sites

Well, the upshot of this is currently the following: It will cost $50-60 to resurface the board.  Question is: is it worth it?  And the marble shop acknowledged that they call it a "cutting board" even though you shouldn't cut on it.

 

 

Link to comment
Share on other sites

×
×
  • Create New...