Martin Fisher

Is it true, as one reviewer said, that after 30 minutes it can only be set in 5 minute increments? Yes, that is correct but it's never been an issue because I find that I very rarely have to set it at anything other than 5 minute intervals beyond 30 minutes. On the rare occasion that I need to set it at something like 48 minutes, I set it at 45 minutes and when the time is up, the timer will count up from zero at the point the alarm goes off- so in this case - you're done after the additional 3 minutes. No big deal.

This is what I have.... Chef's Quad-Time Professional It works great.

The 2005 Canyon Country Concord from Oregon Hill Winery coalesces cruel vinyl essences and a titillating acetone bouquet with a cantankerous kerosene finish.

For 3 pounds of potato salad, I think that a 2 quart bowl should fit the bill with a bit of space left over. A 3 quart may be best if you want extra mixing room. I favor deep stainless steel mixing bowls. Rosle makes a nice one, but I don't have experience with their lids which are available separately. They may be priced lower on Amazon.

Here in the US, home canning in oil or fat (or even adding oil or fat beyond what's specifically called for in a tested recipe) isn't recommended (as per the extension services mostly...Cornell and Penn State in my area) in any thing other than recipes that are officially tested for safety because added fats and oils have a tendency to insulate pathogens from the heat of a home canner. The rule applies to both pressure canning - which is essential when canning low-acid foods such as fish and seafood - and boiling water bath canning. Having said that, there are some folks who ignore the warnings and take the risk. IIRC, there is a tested recipe for tuna canned in oil in the USDA's Complete Guide to Home Canning.

Anticipated release date: November 18, 2013. Current draft of the Sansaire user manual.

Whether they compete or not depends on what specifically you're trying to accomplish. Regardless, I categorized them differently. A timer or clock is potentially only an indicator of how long the unit was off. What really matters is the temperature of the bath during the down time. Guessing that the bath temp remained at safe levels during the timer or clock indicated down time doesn't seem like a good idea to me, unless said down time was very short.

With auto resume how does one know that when unattended (and short of using a recording thermometer which can be expensive) the unit wasn't off and the food in the 'danger-zone' for an extended period of time creating a serious safety risk?

I think that the race is definitely on between the Anova and the Sansaire. So far I favor the Anova by a mile. I don't see the Nomiku or PolyScience DISCOVERY taking much more than a nibble of the market. On the non-immersion circulator front, the Codlo and DorkFood DSV are nothing to get excited about compared to the Sous Vide Magic.

California Olive Ranch oils are available here, how's one to know for sure that they can be trusted?

Well, regulations may make some difference but humans will remain human which means the problem will continue to some extent. Organic food is regulated but that doesn't prevent cheating. The problem is, from a consumer standpoint, you have no idea what's good and what isn't.

As far as the crocks go (they're what we used for years and years,) I don't see them as being ideal.....that includes both standard crocks as well as the crocks with the sealing lip like the Harsch-Gairtopf crocks or the Polish crocks sold by The SausageMaker in Buffalo, NY. They're expensive, heavy, breakable, the included weights can give fits and some of the older crocks weep. I rarely use the crocks anymore unless I feel crazy enough to make an occasional huge batch, which doesn't happen very often anymore.

Yet some large (and some not so large) commercial lacto-fermented sauerkraut makers use stainless. Other metals are to be avoided.

The only potential problem I see with using a good stainless steel stock pot is the large surface area. It's best to limit surface area as much as possible and even though that can be countered with some of the techniques mentioned above it could still be a nuisance. A stainless steel bain marie should work okay. Having said that, a wide- mouth half-gallon Mason jar is my favorite kraut vessel, it'll hold about 4 pounds. All you need for an airlock is the canning lid (no band) with a weight on top....a pint jar full of water works good.

Yes, the SVM also pulses off and on when it nears and maintains the set temperature.

I'm not so sure it was a smart move....the specs are disappointing, the color is unappealing and the price isn't especially competitive given the specs. Cheapening a top-of-the-line brand name can be a very damaging strategy. Remember the Cadillac Cimarron?

Wow, that's rather disappointing...I'm surprised! Out of curiosity, I just performed an experiment with the FMM, which is allegedly 1500W. It took it exactly 53 minutes to ramp-up a little bit over 14 liters from 20 C to 90 C....that's in an uncovered and uninsulated 22 liter Cambro-style polycarbonate container filled to the 15 liter line to compensate for the volume of the FMM and a tiny amount of evaporation. Edited to add: The FMM takes up about 470ml in volume, evaporation was ~220ml and the exposed surface area at that level in the container is just shy of 100 square inches.

Yeah, the BBC program 'The Very Hungry Frenchman.' I'll likely attempt it in the pressure cooker, not sous vide.

Raymond Blanc reduces the wine to 1/2 or 1/3 and then marinates the beef in the wine for 12 hours. I'll likely do the same. http://www.youtube.com/watch?v=c7cs1XaHRu4

Yet it is used in fermentation because it's only effective in controlling certain bacteria reliably and much of that is only in synergistic conjunction with effective levels of salt, acidity, etc. Having said that, nitrite/nitrate isn't essential in all meat curing, some meats are cured with just salt, but, unfortunately, where nitrite/nitrate is needed for safety's sake, some of the fancy "pink" salts are sometimes confused with nitrite/nitrate salt and that could be very dangerous!

Coincidentally, I was researching this a couple days ago. I wouldn't think that chuck-eye would need much time sous vide....it's naturally quite tender.

In my experience, you're correct, in won't work. http://forum.chefsteps.com/discussion/1215/thrifty-vac#latest

I hope the course is real good, I've been waiting for several months.

I think I'll hold off for a while before I commit to an immersion circulator to let the reviews flow in. http://www.cuisinetechnology.com/sousvide-discovery.php

This designer Ball jar will fit into many of the smaller pressure cookers. It's pint sized, ~3 and 3/4 inches tall (95 mm) and wide-mouth, which is nice.