Jump to content

dcarch

participating member
  • Posts

    4,686
  • Joined

  • Last visited

Everything posted by dcarch

  1. dcarch

    Keeping bottles stable

    It's a little complicated, but I will explain. An electric mechanical compression motor is designed to operate vertically. It may have valves, interior refrigerant drain paths and thrust motor bearings which should be operated only in their designed position. An electronic one, OTOH, has no moving parts. It uses a noiseless Peltier junction thermal electronic device to "pump" BTUs. All you need is to tile it about two or three degrees to counteract gravity. It will not have any impact on anything. You refrigerator may have adjustable leveling legs to do that. You can also get silicone bake sheets to separate the bottles. Will look much better than cardboard. They don't rot and dishwasher safe. If you are in Paris, do take a look at earthquake risks in your zone and make appropriate preparations. dcarch
  2. dcarch

    Keeping bottles stable

    I think it is an electronic refrigerator, not an electric one. There is no moving parts except cooling fans. You can tilt the refrigerator backwards a few degrees so nothing falls out. Or if you are not a believer of storing wines horizontally, lay the refrigerator horizontally and store the wines vertically. dcarch
  3. An immersion heater is the most efficient. 100% of the energy is converted into heat. An induction cook top needs energy to drive the electronics and a fan to cool the electronics. dcarch
  4. Pressure cooking and slow cooking are not interchangeable. They are for different recipes. Just like deep frying is not the same as steaming. One thing I always find surprising is the number of comments from users who tout the fact that they can't smell what's cooking in any of these machines. I like the smell of the foods I cook permeating the kitchen and beyond. The aroma that fills the whole house is the aroma no longer in your food. (edit: We were posting at the same time, JoNorvelleWalker ) I think you know what a router speed controller (PWM voltage controller) is. (You are the one who knew what a gear puller is, if I remember correctly ). Plug an electric pot/cooker into a router speed controller ($20.00) and you can control temperature from 0 watts to full watts. dcarch
  5. 58 what? 58 pieces? You know 5 gallon buckets? I think I have 4 buckets full. dcarch
  6. You have completely misunderstood what I was saying. In trying to explain the meaning of humidity in regular air that we breath, I was saying in a given volume, % of humidity will not displace quantity of air molecules, until it goes beyond saturation. Just like salt dissolving in water will not change the volume of water or the quantity of water molecules. dcarch
  7. That is exactly what I was trying to say (see above), that you can't get all the air out. dcarch
  8. Actually, if you roast them, like clams, many of them will crack open a little, letting you to use a knife to pry them open. They are oily nuts if you roast them. Yeah, they call them "Butternuts". Tasty, but not very meaty. Dieter's nuts. It takes a while to eat a lot, LOL. dcarch
  9. I have a huuuuge one in my garden. it rains nuts like bombs. The tree is so tall, and the nuts are so aerodynamically shaped that it can actually hurt you if you are hit. I actually have to wear a construction hard hat if I am in the area. 1. It takes forever to peel off the thick pulp, or you can collect a whole lot in a bucket. The pulp rots very quickly into a black mess. Then use a pressure washer and blast the rotted pulp away. Very quick and easy. 2. "A tough nut to crack". May be they are talking about butternuts. they are very tough. But you can use a shop vise. Very easy to crack. dcarch
  10. dcarch

    Dinner 2017 (Part 6)

    "Started with some decent oysters" And it's well known that consuming decent oysters can lead to indecent acts later on. dcarch
  11. Therefore, we are in agreement. I was only questioning your following statement, : "---As it creates pressure the cooker first forces all of the air out of the vessel,----" dcarch
  12. I don't believe so, according to the law of physics (as I understand it) . Air and water vapor under typical situations, including inside a pressure cooker, are always mixed in exact constant proportions based on temperature and pressure. The air coming out of the pressure cooker is not just air, and the remaining water vapor inside the pressure cooker is not just water vapor. When they say air humidity is 100%, all that means is that the water vapor in the air at that pressure and temperature has reached it max saturation proportion relative to air. It does not mean that there is no air. As a matter of fact, the same amount of air molecules is still there. Think salt water solution. there is a variable % of salt that can be dissolved in water , depending on temperature. When you reach 100% saturation, it does not mean there is no water in the solution. Interestingly you can add salt to water up to 100% saturation without increasing the volume of the mixture. Also, water vapor is not visible. Steam is no longer vapor, it is water droplets you can see. Even "pure" water has air in it. That also is a function of temperature and pressure. dcarch
  13. Right. There is a relationship between temperature, pressure, water vapor and air. There is always air and water vapor mixed. You can't drive out all the air in a pressure cooker. dcarch
  14. Is that true? I am not sure. dcarch
  15. I am pretty good in figuring out how to cook various recipes. All except hand pulled noodles. I am not the only one who has failed many many times. Many have tried. No one has succeeded yet. dcarch
  16. I had posted this before. The theory behind my design: 1. Conventional arched cold frame design have the headroom problem for plants near the edges. My design is uniform in height all around. 2. The problem with many cold frames is where do you store them when they are not in use. My design can be taken apart and reassembled in minutes. The parts are all modular and take very little room to store away. 3. Portable, light weight. Can be moved around. Each one is 4'W x 8'L x 2'H. Plenty of growing space. 4. Inexpensive. All plastic plumbing parts. dcarch
  17. dcarch

    Dinner 2017 (Part 6)

    Do me a favor. Can you name a few famous chefs who can also take good food photos, and can you tell me how many good food photographers who are also good cooks? Also, sophisticated cooking does not mean complicated cooking. I hope you are feeling better soon. Good cooking helps to promote good health. dcarch
  18. dcarch

    Dinner 2017 (Part 6)

    Got to use up veggies from the garden. dcarch Steak, soud vided Head-on shrimps on mustard green
  19. And if the chickens are fed with stuff grown using copper sulfate (there may be other "organic" chemicals), they can still be classified as "organic"? I guess there is one way to be sure, grow your own. dcarch
  20. Source, Googled, quoted from Mother Jones, http://www.motherjones.com/food/2014/01/organic-chicken-and-egg-antibiotics-edition/ "----I learned that at the industrial hatcheries that churn out chicks for the poultry industry, eggs are commonly injected with tiny amounts of an antibiotic called gentamicin, which is used in people to treat a variety of serious bacterial infections.That alone dropped my jaw—what, the practice of dosing chickens with antibiotics has to begin literally in the egg? But get this: The practice is allowed in organic production, too. Organic code forbids use of antibiotics in animals, yet in a loophole I’d never heard of, such standards kick in on “the second day of life” for chicks destined for organic poultry farms.-----" dcarch
  21. Is it true that farms can use hormone and vaccine when the eggs are being hatched and still call the chickens organic? dcarch
  22. dcarch

    Wonderbag

    Ridiculous. Wrap a couple of towels and save your $70. Or buy a pet sleeping bag. dcarch
  23. Don't mean to go off topic: Knife making can take you years of learning and practicing. Or you can have a very useful knife made cheaply, if you have a few simple tools. Since I didn't want to spend $500; A knife I made: a 330mm single bevel yanagiba. $20.00 tool steel (D-2 steel) on ebay. Tool steel can be excellent for kitchen knives. Tool Steel is made for cutting steel. Shape the steel with an angle grinder into a blade you want ( you can buy an angle grinder from HarborF for less than$20 if you don't have one) Send to have the blade cryo-hardened and tempered ($20) Sharpen the hardened blade yourself, add handle. dcarch
  24. I think we are talking about this. I could be wrong: dcarch Many use home made knives for shaving noodles there is also this one
  25. I happened to watched on youtube a day ago. They used a home-made shaver to cut. dcarch
×
×
  • Create New...