Jump to content

slkinsey

eGullet Society staff emeritus
  • Posts

    11,151
  • Joined

Posts posted by slkinsey

  1. That's not the way it works. Trans-fats are not naturally-occurring in any meaningful quantity, and there is strong and generally accepted scientific evidence that (a) consumption in reasonable amounts has certain negative health consequences and (b) there are viable alternatives to its use.

    Sucrose and other sugars, on the other hand, are naturally occurring in abundance. Furthermore, there is no strong or generally accepted scientific evidence that the consumption of sucrose or any refined sugars in reasonable amounts has any particular negative health consequences.

    What does have negative health consequences is the overconsumption of calories, and the pervasive use of refined sugars in refined foods (also an area where trans fats were overused) has certainly contributed to that.

    But, the standard is not for the non-alarmists to "prove that white sugar is not harmful for your pancreas and skin and cardiovascular system." Rather, the standard is for those who make the positive claims to prove them. Recitations of what Grandma says do not constitute meaningful support of your positions.

    I don't think anyone is suggesting that it's healthy or won't have any health consequences if someone were to take in 100% of his calories in sucrose and pop a multivitamin each day. (Then again, one could say the same thing about a diet that relies too much upon meat, fish, citrus, leafy green raw vegetables, etc. as the main source of calories.) But there is no credible evidence saying that a teaspoon of sugar in one's morning tea and a slice of pie for dessert represents a major health risk.

  2. But I also drink two cans of coke classic a day. And if you think that is good for you, then soak a pice of meat in coke and see what happens.

    I wouldn't be too worried about that. Try soaking a piece of meat in pineapple juice or papaya juice for a day and see what happens. Surely you're not suggesting that pineapple juice is bad?

    On the same google page, this article, "Sugar's effect on your health" http://www.healingdaily.com/detoxification-diet/sugar.htm. I boldened and underlined some key points.
    In the last 20 years, we have increased sugar consumption in the U.S. 26 pounds to 135 lbs. of sugar per person per year! Prior to the turn of this century (1887-1890), the average consumption was only 5 lbs. per person per year! Cardiovascular disease and cancer were virtually unknown in the early 1900's. .

    You believe them when they say that "cardiovascular disease and cancer were virtually unknown" in the beginning of the 20th Century? How can we possibly believe anything else these people write when they make such a ridiculous and clearly wrong assertion?

    Cancer, for example, has been documented and remarked upon as early as 1600 BC, so I think it's safe to say that it was not "virtually unknown" in 1900. Some cancers that were quite common 100 years ago (e.g., stomach cancer) actually are relatively rare today. I could say similar things about cardiovascular disease. So, no... sugar is not causing an increasing spike in cancer and cardiovascular disease rates -- mostly because there is no spike in cancer and cardiovascular disease rates. We are, however, a lot better at detecting and classifying (and treating) cancer and cardiovascular disease than we were 100 years ago. And, on top of that, people are living a lot longer these days, so there is quite a lot of increased opportunity to develop cancer and cardiovascular disease, and for such cancer and cardiovascular disease to be detected (and treated) before the person dies. Even if there were an overall rise in cancer and cardiovascular disease compared to 100 years ago, there is no credible evidence that such a rise could be attributed to increased consumption of refined sugar. Increased diagnoses of cancer and cardiovascular disease happen to correlate highly with things like telephone poles per capita and other markers of a modern First World society.

    However, incidence of cancer is rising.

    No, it isn't. Our ability to detect and classify cancer is growing more advanced. And actually, even with modern-day detection capabilities, according to the American Cancer Society: ". . . age-adjusted incidence rates for all cancer sites combined continue to decrease."

  3. I don't know if anyone else is finding this, but I am finding that seasoning with some garlic powder when cooking sous-vide seems to result in better flavors than trying to use fresh garlic.

    I think most SV applications don't attain a high enough temperature to "cook" the garlic in a way that provides the garlic flavor most of us are looking for. In general, meat SV temperatures are not sufficient to cook vegetables. With something highly aromatic like garlic, it's possible that meat SV temperatures might cause unexpected/undesired flavoring results by facilitating certain reactions but not others. In general, I think most people do not like using fresh garlic for SV.

    Has anyone added a little roasted garlic to the bag to infuse with garlic?

    Yes, but the flavor is quite mild. If you want a more traditional garlic flavor, you might try cooking minced fresh garlic in oil or butter to the appropriate stage, quickly chilling/freezing the oil-and-garlic mixture to stop any further cooking and adding that to your bag.

  4. Very nice to see a cocktail named after one of my favorite composers. Is this a Bellini riff? Awesome list.

    To pick a minor nit: It's Amaro CioCiaro, not Amaro Cio Ciaro (as explained here, and also see the producer's product page here where it is spelled without capitalizing the second C -- which I would take to be the most correct). Not a big deal, but maybe worth fixing before you print. :smile:

  5. This is one reason it's nice to have a very thin probe. Not only will the thermocouple react more rapidly, but the thermal capacity of the probe will be lower.

    In terms of probes conducting thermal energy into the food, this is of course only a concern when one is using a probe that stays inside the meat while it is cooking. In these situations, a leave-in probe can function much like those aluminum potato nails, conducting heat into the surrounding food. When using a hand-held probe, the effect is just the opposite: the food conducts heat into the probe. This is what enables the thermocouple to gauge the temperature, however, so that's okay. The probe isn't in the food long enough to make a significant difference as to thermal energy in the food, and any temperature effect created by a disequlibrium of temperature will be far below the sensitivity of the thermometer.

  6. Anodized aluminum is notorious for accumulating spots of polymerized fat, which are then incredibly difficult to remove. This doesn't make much difference for a grill pan, of course, but properly cleaned anodized aluminum is considerably less "sticky" than anodized aluminum with polymerized fat. This is most obvious when there are only a few spots of polymerized fat on an otherwise clean anodized aluminum surface -- the spots of polymerized fat are always exactly where food will stick.

  7. This Comark P250 thing with a street price of $99 has 0.1° resolution and a similar design to the Thermapen (fold-out needle, one-handed operation). I don't know about its response time, though. There are models from a couple of other companies that I was able to find that have similar stats, like the Taylor 9405. Those aren't cheaper than the Thermapen, but they indicate the possibility of other options.

    Right. I suppose I should have said: the Thermapen or other similarly designed and priced options. (The Comark uses a T-type thermocouple whereas the Thermapen uses a K-type. I have no idea whether or how this might make a difference.)

    We should also just note for those who haven't studied all the models carefully that the regular Thermapen doesn't have 0.1° resolution -- only the "high-accuracy" (which I believe is a misnomer given that it refers to precision not accuracy?) models do.

    The "high accuracy" Thermapen has not only finer resolution, but also better accuracy. The regular Thermapen has accuracy ±1% ±1 digit; the high-accuracy Thermapen has accuracy ±0.8F/0.4C ±1 digit.

  8. When you dry shake at room temperature, you evaporate some of the alcohol into the airspace, which expands giving the air in the shaker "positive internal pressure." This is the opposite of the "negative pressure" that is created when shaking with ice, which we all know helps to keep the pieces of the shaker together. The end result is that some of the air inside the shaker would like to escape to create equilibrium. The same thing would happen were you to dry shake with warm water.

    NB. There is really no such thing as "positive or negative pressure." What we mean by saying this is "greater or less than atmospheric pressure."

  9. IMO the value of something like the Thermapen would depend greatly on a conbination of three factors: First, the extent to which something offering reasonably similar performance and convenience can be had for a significantly lower price. Second, whether you perform any cooking tasks that rely greatly upon the fast response time and accuracy offered by the Thermapen. And Third, how often you like to use a themperature probe in cooking.

    If, for example, you cannot get a convenient single-hand small temperature probe for significantly less than the Thermapen, and you like to use a temperature probe on a multiple-times-a-day basis, shelling out a hundred bucks for a Thermapen strikes me as money well spent. On the other hand, if you only use a temperature probe a couple of times a month, and/or you don't mind the inconvenience of taking temperature readings via a needle connected to a box with a wire, then you can find satisfiaction at a much lower price point. There is, of course, an almost infinite number of individual considerations relating to these three factors.

    One thing that seems somewhat clear is that, if you would like ~1 second response time, resolution to 0.1C and a convenient all-in-one-hand design, the Thermapen may be the only game in town.

  10. i've seen other things "precipitate" as well and give off that "devil's water" effect... if it gelatinized you could probably double strain off particles and if it precipitated all would probably go through a very fine strainer....

    In case it is not familiar to everyone, when something "precipitates" that means that it comes out of liquid solution into a solid form. Often, but not always, this is in the form of extremely fine particles. If these fine particles do not cohere into larger pieces then, as bostonapothecary says, the particles are usually too small to be effectively filtered out by passing the suspension through a fine strainer. Just looking at Erik's picture, it's not clear to me that a fine sieve would have had much effect. On the other hand, had he added the prune syrup to all the other ingredients combined, instead of first mixing it with kirschwasser (I believe Trimbach is around 90 proof?), it's possible that the percent alcohol wouldn't have been high enough to precipitate out the soluble fiber. Once it did precipitate out, however, there was no putting it back into solution.

    So apparently, "Prunelle" is a difficult to find liqueur made from Prune Plums.

    How is this different (or is it) from a damson gin?

    Just to clarify this a bit... prunelle is the French word for the fruit of the Blackthorn shrub, a/k/a "sloes." The French word for "plum" is pruneau. The prunelle/sloe is not the same thing as a damson. A sloe is Prunus spinosa whereas a damson is a subspecies (insititia) of Prunus domestica, which is where most domestic eating plums are found.

    So, I suppose the question is how prunelle is different from sloe gin rather than from damson gin. From what I have been able to read, I suppose that sloe gin might be the best substitution if one can find the real thing. It's not clear to me how these spirits differ, except that prunelle is a creme liqueur made with a neutral spirits base whereas sloe gin presumably has a gin base (although usually not) and perhaps other flavorings. Perhaps prunelle is made by a different process than sloe gin (e.g., without the pits)?

  11. I peel beginning at the arctic circle and proceeding in more or less one spiral down to the anarctic circle. Then I cut off the bottom to make a level base. Then, balancing it on the base, cut down across the center once, turn the entire apple one quarter-turn (keeping the two halves together) and cut down across the center once again. Then I cut off the pointy axis of each quarter to remove the core in a straight cut (which also gets the stem and any residual arctic peel).

    "Cutting around the center" only saves two knife-strokes on that method (unless you decide to forego making a flat base, which you could always do with my method as well so long as you don't mind maybe losing a finger) and, as Steven observes, results in unevenly sized pieces of apple -- fine for applesauce, but not so much for tarte tatin.

  12. For people who subscribe to a topping-centric view of pizza appreciation, for whom the crust is mostly a vehicle for plentiful toppings, and who prefer pizza in what I might call the "pizza parlor" style, Di Fara is justly considered the pinnacle of the craft --largely for the high quality of toppings used. I think of it, with absolutely no offense intended, as the top end of a style of pizza that has Domino's down at the other end of the quality scale. This is the style of pizza with which most Americans are most familiar, so it's no surprise that Di Fara is so popular.

    Like yourself, that style doesn't excite me enough to go all the way out to BFE for a slice. But I'd probably go there every so often if I found myself in the neighborhood with any frequency.

  13. Steven: Do you want the apples whole after peeling and coring? If pieces are okay for your use, I find that peeling around in a spiral (a good, sharp peeler is very important) and then quartering the apple and cutting out the inner point of each wedge (removing the core as well as the stem end and any tiny bits of peel remaining at the top and bottom of the apple all in one cut) is easy and efficient. I assume this is similar to your technique?

  14. Erik, are you sure it "gelatinized"? It sounds a bit more like "precipitated" to me. Or are you saying that the entire volume of prune syrup reacted with the alcohol, clumped up and refused to mix?

    Anyway, I have seen some things precipitate when added to alcohol. Once I wanted to make an Old Fashioned with Red Hook rye (at around 136 proof) and gomme syrup instead of regular simple syrup. As soon as I added the booze to the glass, the gomme (which usually mixed in completely transparently) threw off a cloud of white particulates that never re-dissolved into the drink, even after the proof had been diluted significantly by the melting ice. This is similar to the louching that happens when water is added to absinthe, except that it's the water-soluble substances that precipitate when the proof is raised rather than the alcohol-soluble ones when the proof is lowered.

    So... since prune juice is very high in soluble fiber, and considering that this generally means "water soluble" -- it's possible that the addition of high proof kirschwasser caused the soluble fiber to precipitate out of solution.

  15. WRT switching between degrees Celsius and Fahrenheit, I find that once you get used to one scale, switching doesn't really matter too much. Rare beef is rare beef, no matter what temperature scale is used. Since I've been using a Lauda circulating water bath heater for several years that measures in degrees Celsius, I have become accustomed to thinking in that scale. If I happen to have a cookbook that specifies some Fahrenheit temperature with which I am not familiar (I am quite familiar with meat cooking temperatures for various levels of "doneness" but not so familiar with, say the temperature at which egg yolks curdle) I simply visit the convert-me.com temperature conversion page, do a one-time conversion and write the temperature into the book in degrees Celsius.

  16. "Overheating" the liquid is a technique that is familiar to most all-grain homebrewers, where this is called the "strike temperature." When you're using relatively known elements (water and cracked malt in the case of homebrewing) it's easy to predict how high you need to heat a certain amount of liquid in order to arrive in the ballpark of another temperature after mixing in a certain amount of room temperature grain.

    To really figure out how much to overshoot you need to know how much oil you have, how much food you want to fry, the temperature of that food, and to a certain extent the nature of that food (a pound of french fries will have a different effect than a pound of chicken thighs). Of, of course, you can just do it by the seat of your pants. One way would be to put in a small amount of food and keep on adding food in small amounts until the thermometer drops down to your target temperature.

  17. Further to my point about international haute cuisine not being particularly French, I'd like to make a few examples:

    gallery_122_1858_26147.jpg

    Carpaccio of blue fin tuna, eggplant caviar and mozzarella underneath, osetra caviar on top

    French or Italian?

    gallery_122_1858_7117.jpg

    Chatham cod with braised fennel, raw fennel and fennel essence

    French or Italian or American?

    gallery_122_1858_11434.jpg

    duck liver terrine with mission figs

    French or Italian?

    I would argue that the only dish that seems connected to France and French cooking is the last one. The first two could easily have come from fancy restaurants with an Italian name. But they're sort of not Italian either. Which is to say that they don't seem like they are "from" anywhere except being out of the kitchen of a very expensive high-end fine dining restaurant. For some reason, however (probably because they more or less invented it) we don't have any difficulty calling dishes like these "French" when they come out of a restaurant with a French name on the door, but many people would have some difficulty calling the same dishes "Italian" -- despite the fact that I don't see either of those two dishes as being any more connected to France than they might be to Italy. It's this sort of thing, I think, that can bias people against the idea of Italian restaurant cuisine that moves as far away from Italian cooking as these dishes do from French cooking. For some reason we're more protective of Italian cooking in our minds -- or less protective of French cooking, take your pick.

×
×
  • Create New...