Jump to content
  • Setting up your Profile: Cover Photos and Profile Photo (aka 'Avatar')


    eG Forums Host

    Your user profile 'wall' now has 2 photos if you care to use them: the Profile Photo (formerly known as an 'Avatar') that appears with each of your posts, and a Cover Photo.  To set them, click on your user name at the upper right corner of the screen.  A drop-down menu will appear.  Select "Profile".

     

    Profile settings pick.jpg

     

     

    The initial wall setting shows a deep blue background where your Cover Photo will appear, with a smaller place at the lower left where your Profile Photo will appear.  Both are optional.  You need to set each one individually.

     

    Profile photos corrected.jpg

     

     

     

    The Cover Photo can be any size, but it will always be the rectangular shape shown here, with the full width of the photo stretching across the screen at a width:height ratio of 12:2.  In other words, if the photo stretches across the screen 12", it will be 2" tall. Select the  "Cover Photo" link at the upper right corner to upload an image.  Once it's uploaded, you can reposition it to get the vertical section you wish.  Click "Save position" when you're satisfied.  Remember, you can always change it later.

     

    User cover photo loads at top.jpg

     

    To change or reposition your cover photo after it's been saved, click the same "Cover Photo" link to remove or reposition the photo.

     

    To select a Profile Photo, click the lower left image.  Profile Photo size is restricted to 500 kb.  If your image is too large, you'll get an error message.  Note that profile photos are square.  Once the image is uploaded, a frame will appear for you to select the portion of the photo you wish.

     

    Profile photo adjust.jpg

     

    Select the area you want, then click "Save".

     

    Edited by Smithy
    Corrected images

    • Like 1

    User Feedback

    Recommended Comments

    There are no comments to display.


×
×
  • Create New...