Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create an account.

Dave the Cook

Hand-held citrus juicers

Recommended Posts

I still don't understand the problems you folks are having with the lemon squeezer.

So, I'm sacrificing my hands and enduring a little pain for this set of instructional photos.

Here's the way I do it and the juice does not come out of the sides - in the next to last picture you can see that the rim is dry.

All the juice went into the bowl (except for the tiny puddle from when I cut the lemon)

. . . .

Andie, thanks: I would never have guessed that these juicers were intended to be used this way (this is not an intuitive design).

Share this post


Link to post
Share on other sites

Of course that's the juicer that Sam refers to in his post above.

I find that they do a pretty good job, but if the lemon is a large one it won't fit in, and then it is perfectly useless. Of course, OXO makes one, and I wonder if the OXO design is better or easier on the hands?

Share this post


Link to post
Share on other sites

I have that OXO and it works decently, except the paint has chipped off in the juicing area. Not sure where it went, into my juice or just rubbed off in the dishwasher. I'd get the enameled ones like the Amco next time.

Share this post


Link to post
Share on other sites

If you're investing in that style of juicer, get one made from stainless -- like this one from RSVP Endurance. The enameled ones chip and break easily. I've had my stainless one for years, after having been through 4 or 5 of the cheaper aluminum/enamel ones.

Andie, I agree that they're easy to use and get a lot of juice out, but they're not always perfect. If your lemon is not round on the ends, it can easily be pushed off center, which can cause juice to fly everywhere. And as Mitch said, if your fruit is too large, you'll have problems as well.

Share this post


Link to post
Share on other sites

If you're investing in that style of juicer, get one made from stainless -- like this one from RSVP Endurance. The enameled ones chip and break easily. I've had my stainless one for years, after having been through 4 or 5 of the cheaper aluminum/enamel ones.

Andie, I agree that they're easy to use and get a lot of juice out, but they're not always perfect. If your lemon is not round on the ends, it can easily be pushed off center, which can cause juice to fly everywhere. And as Mitch said, if your fruit is too large, you'll have problems as well.

$35 bucks? Seems high.. But if it lasts a long time, then I guess it's worth it.

I have one just like andiesenji. It's a bartenders best friend. Right up there with the shaker and strainer. Before, I had a smalle green one (for limes). After time, the paint (poweder coating?) started to chip and flake offf. Then the whole thing broke. So, I got a yellow one. It's bigger to handle lemons. But limes work just great in it.

if the ends of the lemon are "pointy", I just flatten it out by trimming of the point with my pairing knife.

Share this post


Link to post
Share on other sites

If you're investing in that style of juicer, get one made from stainless -- like this one from RSVP Endurance. The enameled ones chip and break easily. I've had my stainless one for years, after having been through 4 or 5 of the cheaper aluminum/enamel ones.

Andie, I agree that they're easy to use and get a lot of juice out, but they're not always perfect. If your lemon is not round on the ends, it can easily be pushed off center, which can cause juice to fly everywhere. And as Mitch said, if your fruit is too large, you'll have problems as well.

If they are too pointy at the ends I just trim the points off - the pith is extra thick there so the juice does not escape.

I had breakfast with a neighbor down the road this morning. Her husband moonlights as a bartender (regular job CHP officer) and she showed me the ones he uses on a regular basis.

This one can squeeze slices, quarters or half a lime, most lemons are too large to squeeze a half: But you need strong hands because the handles are short.

He uses one similar to the one I pictured but it is stainless steel.

It is like this one but he bought it at a restaurant supply. She says he bought two because he wasn't sure if the welds would hold but so far it has been in use for a couple of years with no problems.

He has a collection of vintage squeezers, several wooden ones from England, France, Germany, one from Hawaii carved from Koa wood and several from the Carribean Islands - one from Cuba someone got in the early '50s, that is shaped like an alligator. I had no idea they were so varied in design.


Edited by andiesenji (log)

Share this post


Link to post
Share on other sites

aefc0161-713b-f694.jpg

I don't know who made this, but it's one of my favorite things in the kitchen. I bought it at a pottery studio down the block from the apartment where I lived in the early 90s on 105th and Amsterdam. It was called something like "The Mud Shop." The ridges on the juicer are fairly sharp, so it is particularly effective for this style.

Share this post


Link to post
Share on other sites

I've got several different sizes of the kind that andiesenji demonstrated. They work great.

Share this post


Link to post
Share on other sites

I have an aluminum hand juicer that fits over a measuring cup that I just love--I hardly ever take out my electric juicer unless I am doing a ton of lemons. I can't find a picture online, I will take one this weekend and post. It is primitive but unbelievably effective.

Took me a while but here it is. I made lemon meringue pie today and had 2/3 c of juice in the wink of an eye.Juicer1.JPG

And fitted over a small bowl (it has a little lip, the perfect size for a measuring cup)

Juicer2.JPG

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×