Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

nathanm

Cooking with Liquid Nitrogen

Recommended Posts

The only "pros" with LN2 I know are the ones that work for the LN2 companies. I go through 1,000 litres of LN2 every week. Thats enough to be considered a pro, but I am far from a pro when it comes to the knowlegde the scientists have. I can tell you LN2 is no more hazardous that working with gas burners. One just has to be careful to have adequete hvac and dont keep your hands in the thick fog or liquid for too long. The rules of engagement are similar to a gas flame. If anything, gas is MORE dangerous because it can blow up the kitchen if youre not careful.

That's a little ridiculous. People are not blowing up kitchens with any regularity.

Telling people not to wear gloves and goggles when working with Ln2 is irresponsible.

That just proves my point, kitchens dont blow up just like only someone who has no idea what they are doing will injur themselves with LN2. Do we work with gloves when we cook or wear a mask when we pan fry to prevent oil from splattering into our eyes? No, but accidents happen. Ever heard of someone in a kitchen losing a finger or getting a 3rd degree burn because of LN2? I have not. Thats not to say we arent extrememly careful when we work with it. We are very respectful of the element, just like we are careful when working with any gastro techniques/devices.

This is like SARS in my book, more people have died from drunk drivers in the past 60 seconds than the entire history SARS has existed, yet everyone freaks out when they hear about SARS.


Future Food - our new television show airing 3/30 @ 9pm cst:

http://planetgreen.discovery.com/tv/future-food/

Hope you enjoy the show! Homaro Cantu

Chef/Owner of Moto Restaurant

www.motorestaurant.com

Share this post


Link to post
Share on other sites

Liquid N2 can also supposedly be obtained from welding suppliers.

I have burned myself when using liquid nitrogen in the lab. It sputters when you add wet items to it. However- the saving grace to not frequently hurting yourself with it is that it evaporates very quickly.

Also, proper liquid N2 gloves do not absorb the stuff. The gloves are neccesaary as the liquid N2 vapor is extremely cold as well. In fact, it is the vapor we use to keep our samples in the lab frozen, rather than submerging them in the liquid. The liquid is too prone to contamination issues.

An additonal safety mention- liquid N2 is explosive if contained in a traditional home /food thermos or any sealed container. All containers holding liquid N2 must have a vent release.


flavor floozy

Share this post


Link to post
Share on other sites
That just proves my point, kitchens dont blow up just like only someone who has no idea what they are doing will injur themselves with LN2. Do we work with gloves when we cook or wear a mask when we pan fry to prevent oil from splattering into our eyes? No, but accidents happen.

This really isn't a very valid argument. Body temperature is 37C. Frying oil is typically something like 190C, for a difference of 153C. The boiling point of liquid nitrogen is -196C, for a difference of 233C. In order for there to be an equivalent difference in temperature, the frying oil would have to be 270C, aka 518F. Do I think that people should wear safety gear if they are working with an oil at 518F? You bet I do. Liquid nitrogen also has a significantly higher specific heat than typical frying oils. What this all means is that being hit in the eye with a splatter of LN2 would be much worse than being hit in the eye with a splatter of oil from a fryer. Somehow I have a hard time imagining someone working with their bare hands a few inches above the surface of a 518F fryer.


--

Share this post


Link to post
Share on other sites
That just proves my point, kitchens dont blow up just like only someone who has no idea what they are doing will injur themselves with LN2. Do we work with gloves when we cook or wear a mask when we pan fry to prevent oil from splattering into our eyes? No, but accidents happen.

This really isn't a very valid argument. Body temperature is 37C. Frying oil is typically something like 190C, for a difference of 153C. The boiling point of liquid nitrogen is -196C, for a difference of 233C. In order for there to be an equivalent difference in temperature, the frying oil would have to be 270C, aka 518F. Do I think that people should wear safety gear if they are working with an oil at 518F? You bet I do. Liquid nitrogen also has a significantly higher specific heat than typical frying oils. What this all means is that being hit in the eye with a splatter of LN2 would be much worse than being hit in the eye with a splatter of oil from a fryer. Somehow I have a hard time imagining someone working with their bare hands a few inches above the surface of a 518F fryer.

I can dunk my hand in LN2, one cant do that with 500f oil. The difference is the rate that LN2 goes through evaporation and therefore loses its ability sustain a temperature (by decreasing its density) longer than hot oil, or even hot water. So the comparison of temperatue alone simply doesnt work.

I have been splattered plenty of times with LN2, not a single injury. I have plenty of war wounds from other "safe" kitchen devices and ingredients. In fact we have used LN2 on a hot burn immediately after contact in order to reduce the effects heat can have on skin. A very useful tool indeed.

Not only do my blue gloves absorb LN2 but they have also cracked because the LN2 obliterates the polymer fibers they are made of. Perhaps they arent the best pair, but I did get the most expensive I could find from one of the largest LN2 suppliers. I just find them useless and they make my hands freeze. Everyone in my kitchen will tell you the same.


Edited by inventolux (log)

Future Food - our new television show airing 3/30 @ 9pm cst:

http://planetgreen.discovery.com/tv/future-food/

Hope you enjoy the show! Homaro Cantu

Chef/Owner of Moto Restaurant

www.motorestaurant.com

Share this post


Link to post
Share on other sites

Here is something of interest.

Take a smoker and point the smoke into a bath of LN2. Freeze the smoke. There is one more thing that must be added to the frozen smoke to complete the effect. (Because this technique is patent pending for something other than food, I cant say but if you play around with it a bit it will come to you). Place the "frozen smoke" onto a plate and watch it disappear into thin air without any heating element whatsoever.

You can also place oysters into LN2 and seconds later they automatically shuck themselves. That one saves a ton of time.

The liquid encapsulation process from alginates to HPMC and CMC can also be shaved from hours to mere seconds.


Future Food - our new television show airing 3/30 @ 9pm cst:

http://planetgreen.discovery.com/tv/future-food/

Hope you enjoy the show! Homaro Cantu

Chef/Owner of Moto Restaurant

www.motorestaurant.com

Share this post


Link to post
Share on other sites

Very cool, everybody. Definitely some inspiration to start working with the stuff. Thanks!


“My advice to you is not to inquire why or whither, but just enjoy your ice cream while it's on your plate - that's my philosophy”

- Thornton Wilder

Shameless link to Kieranm's blog...

Share this post


Link to post
Share on other sites

I just recently got a tank into my kitchen. I see nothing but possibilities with this stuff...I need time to play with it. Heres a few pics from my first experience. I hope you like them.

firsttimewiththeliquid005.jpg

firsttimewiththeliquid006.jpg

firsttimewiththeliquid007.jpg

firsttimewiththeliquid008.jpg

firsttimewiththeliquid009.jpg

Share this post


Link to post
Share on other sites

Nice.

Who is your supplier?

I use Praxair. www.praxair.com

Try using styrofoam boxes for holding the LN2. It evaporates much much slower and it wont warp your cutting boards, and possibly make a hole in your steel counter tops.

I like to think of LN2 as the exact opposite of cooking or transferring heat.


Edited by inventolux (log)

Future Food - our new television show airing 3/30 @ 9pm cst:

http://planetgreen.discovery.com/tv/future-food/

Hope you enjoy the show! Homaro Cantu

Chef/Owner of Moto Restaurant

www.motorestaurant.com

Share this post


Link to post
Share on other sites

Wow, this thread has really blown me away with some interesting ideas... a few questions arise..

(1) How do the oysters shuck themselves? Do the shells break apart or do they open magically... basically, is the shell lost in the process?

(2) For freezing things that normally dont freeze, how long do they last in that crystalline state? I'm thinking mostly about those pure honey garnishes.


Rico

Share this post


Link to post
Share on other sites

Of course, the other thing you could do which has some great potential -- though no ideas jump out at me at the moment is "cooking with liquid oxygen".

If you have liquid nitrogen, you can have liquid oxygen anytime you need / want it. Liquid oxygen has a higher boiling temperature than LN2 (liquid nitrogen). This means that oxygen turns liquid at a higher temperature than LN2. So, the liquid nitrogen is capable of literally freezing the oxygen out of the surrounding air. Of course, you don't have enough LN2 to do this typically. However, it does not mean that you can't make it happen on demand.

We used to make a liquid oxygen "still" where we would make our own liquid oxygen. All we did was set up a styrofoam container and run some copper pipe around it it in a vertical coil with the coil coming out the bottom. We'd blow compressed air (slowly) through the copper tube and out the bottom would come air -- along with drops liquid oxygen that we'd catch in another container.

Needless to say, we had lots of fun with it. Probably the best was liquid oxygen plus steel wool plus a match. Molten steel goes flying everywhere. Of course, perhaps molten steel wool does not go well with food but I can see some real potential for charring something on demand. (Putting perhaps a new meaning on Blackened Steak.)

-Art


Amano Artisan Chocolate

http://www.amanochocolate.com/

Share this post


Link to post
Share on other sites
Of course, the other thing you could do which has some great potential -- though no ideas jump out at me at the moment is "cooking with liquid oxygen".

Well, I could certainly imagine being able to play around a bit with tableside cooking... if you could work out the liability issues with people getting burnt.


PS: I am a guy.

Share this post


Link to post
Share on other sites
Wow, this thread has really blown me away with some interesting ideas... a few questions arise..

(1) How do the oysters shuck themselves? Do the shells break apart or do they open magically... basically, is the shell lost in the process?

(2) For freezing things that normally dont freeze, how long do they last in that crystalline state? I'm thinking mostly about those pure honey garnishes.

You put the oysters into the nitro for a certain amount of time (seconds depending on the size of the oyster) and pull them out. The calcium shell doesnt have the ability to expand and contract so the top shell pops off. Once you get the timing down to where you dont actually freeze the oyster meat then you can just go nuts with it.

Belon oysters have never been easier.


Edited by inventolux (log)

Future Food - our new television show airing 3/30 @ 9pm cst:

http://planetgreen.discovery.com/tv/future-food/

Hope you enjoy the show! Homaro Cantu

Chef/Owner of Moto Restaurant

www.motorestaurant.com

Share this post


Link to post
Share on other sites
Of course, the other thing you could do which has some great potential -- though no ideas jump out at me at the moment is "cooking with liquid oxygen".

Well, I could certainly imagine being able to play around a bit with tableside cooking... if you could work out the liability issues with people getting burnt.

Liquid nitrogen is indeed used tableside both at El Bulli and The Fat Duck.


We''ve opened Pazzta 920, a fresh pasta stall in the Boqueria Market. follow the thread here.

My blog, the Adventures of A Silly Disciple.

Share this post


Link to post
Share on other sites
Of course, the other thing you could do which has some great potential -- though no ideas jump out at me at the moment is "cooking with liquid oxygen".

Well, I could certainly imagine being able to play around a bit with tableside cooking... if you could work out the liability issues with people getting burnt.

Liquid nitrogen is indeed used tableside both at El Bulli and The Fat Duck.

I know LN2 is used tableside. I was envisioning *cooking* tableside with LOX.


PS: I am a guy.

Share this post


Link to post
Share on other sites

This might be interesting to BryanZ and the molecular gang.

I was recently googling mortar and pestle (mostly to figure out which one was which :blink: ) and they had a photo on the Wikipedia page bottom right that showed pulverized plant product using liquid nitrogen to get a powder instead of a paste. I thought it was pretty neat and it would be an interesting way (if one had access to liquid nitrogen) to make fruit dusts and stuff on the cheap.

Anyone else have any ideas for this?

Share this post


Link to post
Share on other sites

it can remain powder because the nitrogen dehydrates things as well ...freeze dried

liquid nitrogen can be obtained from a welding supply store like Airgas or Praxair ... but you need a duwer or you could rent one sometimes they will do that at these stores.....or a thermos bottle stainless steel ..they will fill that as well...but that would not be as cheap as a whole duwer


Edited by hummingbirdkiss (log)

why am I always at the bottom and why is everything so high? 

why must there be so little me and so much sky?

Piglet 

Share this post


Link to post
Share on other sites

(here's how i remember the answer to your original question:

the pestle is NOT the vessel.

the little rhyme helps me, and if the pestle is not the vessel, it must be--and is--the pounder goodie.)


"Laughter is brightest where food is best."

www.chezcherie.com

Author of The I Love Trader Joe's Cookbook ,The I Love Trader Joe's Party Cookbook and The I Love Trader Joe's Around the World Cookbook

Share this post


Link to post
Share on other sites
Do you mean Dewar?

I could I dont know how to spell it ..the big thing that you keep the liquid nitrogen in that has the dipper to get it out ..whatever that is called ..


why am I always at the bottom and why is everything so high? 

why must there be so little me and so much sky?

Piglet 

Share this post


Link to post
Share on other sites

I'm pretty sure Chef Blais has done this quite frequently. He kind of flies under the radar as compared to some of the others but seems to do a lot of interesting things if liquid nitrogen. I personally still have never used the stuff, as I can't get a hold of it.

Share this post


Link to post
Share on other sites

Bryan's right about Chef Blais. There's a recent article in the Atlanta paper (here, free registration required) that gives a few details. And if you can make your way through Steven's recount of a very long day, you'll be rewarded with a report from what he calls Ferran Adria's bar mitzvah, where Blais set up temporary shop, producing a number of LN2 dishes.


Dave Scantland
Executive director
dscantland@eGstaff.org
eG Ethics signatory

Eat more chicken skin.

Share this post


Link to post
Share on other sites

How strange to see this topic here because just this morning I ground up lichen samples in lab using liquid nitrogen and a mortar and pestle. The technique is extremely simple once you've got hold of some liquid nitrogen. During the course of the grinding procedure the liquid nitrogen is stored in a columnar hot case (or cold case) though I imagine there would be more efficient ways of storing it. The sample (as little as 100 mg) is placed in the mortar and liquid nitrogen ladled into the mortar. Some of the liquid nitrogen is allowed to boil away so that it doesn't splash out when you try grinding it taking the sample with it. Then you use the pestle to pulverise the sample first with a pounding motion to break the sample into small bits and then with a vigorous grinding motion. The sample becomes brittle like glass and breaks easily. What you're left with is the consistency of fine talc which is completely dry. After that we add liquid to it (in this case alcohol) and it's heated in a water bath.

The whole thing takes all of ten minutes and is really rather fun. Do try it if you get a chance. I love playing with liquid nitrogen. :wub:

Share this post


Link to post
Share on other sites

  • Similar Content

    • By onemorebitedelara.com
      Has anyone used Valrhona Absolut Crystal neutral glaze particularly to thicken a coulis or to glaze a tart?  If so, how did you like it and is there another glaze you think worked as well but is less expensive or can be purchased in smaller quantities?  
    • By kostbill
      Hello.
      I would like to buy some pectinex ultra sp-l.
      However I am worried about the temperature during the shipping time.
      I read that the storage temperature should be between 2 and 8 C. It works best from 15 to 50 C, and if it stays a lot of time in 25 C, it will gradually be deactivated.
       
      It needs a week to come here (Greece), then will it affect its abilities?
       
      Do you know if I can find a document somewhere that explains the gradual loss of power as a function of time and temperature?
      Did you have any experience with pectinex not working well due to bad storage?
       
      Thanks.
    • By Galchic
      Hello, folks, thanks for reading.
       
      My husband thinks, I should start selling my popcorn seasonings (which I make for my family), it’s a good product. But I'm not sure if it’s interesting to other people... So, what do you think, guys?
       
      Our story: 
      We’ve bought an air popper machine, but popcorn came out pretty tasteless. Then, we’ve bought different “popcorn seasoning” mixes... But it always ends with all the seasoning at the bottom of the bowl. Then, we've added butter, oil and so on before seasoning...  we got soggy, chewy popcorn. Lot’s of disappointments…
       
      When we almost gave up… the magic happened! I figured out the way to make seasonings that:
      Stick to popcorn, but not sticky to fingers (or T-shirt  , Easy to apply, May be pre cooked in bulk and stored… And popcorn appears crunchy, tasty, thoroughly covered with seasoning.  
      Sounds good, yep? Now, when I want to treat myself  - I only need 2 mins to turn tasteless popped popcorn to a real treat.  
      The only moment - it request 1 extra effort: after you toss it over popcorn, you need to microwave it for 1 min, and stir after.
       
      So, I was wondering, if you like popcorn like myself - would this seasoning be interesting for you to purchase? Are you ready for a little extra work (microwave & stir) in the goal to flavor popcorn, or it feels too much effort?
       
      As I have no experience in manufacturing and retail, your answers would help me to make a very important decision - to dive in or not... 
       
      Thanks in advance for your answers, it means the world to me.
       
    • By lindaj1
      Is there any recipe from the modernist universe or any other galaxy to make ketogenic (low carb) puff pastry and strudel type doughs?  Unusual ingredients OK.  There must be a way...
    • By haresfur
      I got to thinking after the disgusting job of separating globs of fat from sous vide short ribs and debating never doing them that way again. If the fat renders out in a braise, but not in the sous vide, what temperature would you need to turn the fat liquid to get rid of it? Is it below well-done or do you really have to cook the shit out of it? Is it just temperature or a time&temperature thing?
       
      Along those lines, what happens with marbled, tender cuts? where is the sweet spot between solid fat and something more palatable?
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...