Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

JoNorvelleWalker

Methode Rotuts

Recommended Posts

it would be much easier for me to get a Red iSi  that was 750 cc

 

w one charger for the dead space .........

 

but tomorrow. 

 

when Im less Fizzy  

 

and have dug out one WoodPile

 

Ill get something for sure

 

any sales anywhere for Tomorrow ?

 

suprise.gif.5e3c922e05fe3b0ca5301dd2a4be37f1.gif


Edited by rotuts (log)
  • Like 1

Share this post


Link to post
Share on other sites
18 hours ago, JoNorvelleWalker said:

 

I am confused.  For the 1 quart iSi the max. filling volume is specified as 1 liter, and a liter of liquid comes to the max fill line marked on the vessel.  There is headspace above that.  Why would you use only 500 ml?

 

 

I was confused; I think the minimum volume is 500ml. Please ignore.


Notes from the underbelly

Share this post


Link to post
Share on other sites

I am interested in carbonating wine, but like the idea of using a 5 LB CO2 bottle, regulator and hose system. It looks like you could put one together using parts from Amazon or eBay for about $100. Anyone tried it? It seems like you could do thousands of bottles from 1 tank and the cost about $20 to refill.

HC

https://www.youtube.com/watch?v=BLFvw4CVKgY

 

 


Edited by HungryChris (log)

Share this post


Link to post
Share on other sites

very interesting vid

 

thanks

 

a lot of emphasis on saving money , something I respect

 

however , No Wine was mentioned 

 

Im wondering if the PureFizz no longer exists , except on ebay because of liability issues.

 

the 750 cc and 1 L model require you to release the pressure before you open it

 

or Bad Stuff will Happen , perhaps to your Eye ?

 

so Id go with other the PureFizz  ( 750 if you can get it new ) or the iL

 

or just go with the iSi

 

the initial investment is high , and its not fool proof esp after

 

you have a few " toots ' of the MR

 

make sure you understand what these pressure might do to you if you don't pay attention.

Share this post


Link to post
Share on other sites

Forcing CO2 into solution is easy... you don't need anything more than a good source of CO2, and a pressurized vessel.  A 10lb CO2 refill at my local welding shop (where I've become a regular over the past decade or more) costs $22... That provides me with about 6 months worth of all the carbonated beverages I might desire.  Since I'm a homebrewer, I've got a heap of 5 gallon kegs, two of which are dedicated to seltzer duty and reserve seltzer duty.  I've also got a few "carbonator caps", widgets that have the same connector as the kegs do, but then screw onto 1 or 2L soda bottles.  Put whatever you want into the soda bottle (I use plain seltzer bottles because soda flavors can cling), chill it down to 33F,  hit it with 50PSI of CO2 and shake for a minute, and you've got a lovely bottle of  fizzy stuff.  


Edited by cdh (log)
  • Like 1

Christopher D. Holst aka "cdh"

Learn to brew beer with my eGCI course

Chris Holst, Attorney-at-Lunch

Share this post


Link to post
Share on other sites

Agreed forcing CO2 into solution is easy.  But I can't unsee photographs of pressure vessel parts embedded in concrete blocks.  I'd gladly pay people like iSi who have thought about these things.  I pay $125 for a case of thirty boxes of CO2 chargers that last me over a year.

 

Plus I don't have space for the Dave Arnold infrastructure.

 

  • Like 2

Share this post


Link to post
Share on other sites

Good Lord. When my kitchen appliances begin attacking me, I'll know it's time to quit cooking.


Don't ask. Eat it.

www.kayatthekeyboard.wordpress.com

Share this post


Link to post
Share on other sites

  • Similar Content

    • By kostbill
      Hello.
      I would like to buy some pectinex ultra sp-l.
      However I am worried about the temperature during the shipping time.
      I read that the storage temperature should be between 2 and 8 C. It works best from 15 to 50 C, and if it stays a lot of time in 25 C, it will gradually be deactivated.
       
      It needs a week to come here (Greece), then will it affect its abilities?
       
      Do you know if I can find a document somewhere that explains the gradual loss of power as a function of time and temperature?
      Did you have any experience with pectinex not working well due to bad storage?
       
      Thanks.
    • By Galchic
      Hello, folks, thanks for reading.
       
      My husband thinks, I should start selling my popcorn seasonings (which I make for my family), it’s a good product. But I'm not sure if it’s interesting to other people... So, what do you think, guys?
       
      Our story: 
      We’ve bought an air popper machine, but popcorn came out pretty tasteless. Then, we’ve bought different “popcorn seasoning” mixes... But it always ends with all the seasoning at the bottom of the bowl. Then, we've added butter, oil and so on before seasoning...  we got soggy, chewy popcorn. Lot’s of disappointments…
       
      When we almost gave up… the magic happened! I figured out the way to make seasonings that:
      Stick to popcorn, but not sticky to fingers (or T-shirt  , Easy to apply, May be pre cooked in bulk and stored… And popcorn appears crunchy, tasty, thoroughly covered with seasoning.  
      Sounds good, yep? Now, when I want to treat myself  - I only need 2 mins to turn tasteless popped popcorn to a real treat.  
      The only moment - it request 1 extra effort: after you toss it over popcorn, you need to microwave it for 1 min, and stir after.
       
      So, I was wondering, if you like popcorn like myself - would this seasoning be interesting for you to purchase? Are you ready for a little extra work (microwave & stir) in the goal to flavor popcorn, or it feels too much effort?
       
      As I have no experience in manufacturing and retail, your answers would help me to make a very important decision - to dive in or not... 
       
      Thanks in advance for your answers, it means the world to me.
       
    • By lindaj1
      Is there any recipe from the modernist universe or any other galaxy to make ketogenic (low carb) puff pastry and strudel type doughs?  Unusual ingredients OK.  There must be a way...
    • By haresfur
      I got to thinking after the disgusting job of separating globs of fat from sous vide short ribs and debating never doing them that way again. If the fat renders out in a braise, but not in the sous vide, what temperature would you need to turn the fat liquid to get rid of it? Is it below well-done or do you really have to cook the shit out of it? Is it just temperature or a time&temperature thing?
       
      Along those lines, what happens with marbled, tender cuts? where is the sweet spot between solid fat and something more palatable?
    • By Daily Gullet Staff
      By John Sconzo

      The Daily Gullet is proud to present this, the first in a multi-part, front-row report on the recent "Spain and the World Table" conference. Watch for subsequent installments in this topic.

      In his introduction of Ferran Adria, Thomas Keller -- perhaps the most celebrated American chef ever -- described four elements that go into making a great chef. The chef must be aware. Once aware of one’s culinary and other surroundings that chef can then be inspired, which leads to the ability to interpret those surroundings. But a great chef does not stop there. Instead, the great chef continues to evolve. Ferran Adria, perhaps more than any other chef who has ever lived, is the embodiment of those four elements.

      The moment that Ferran Adria strode towards Thomas Keller on the stage at the CIA/Greystone’s World of Flavors’ “Spain and the World Table” Conference was electric -- as if a giant Van de Graf generator had been turned on. The feeling didn’t subside when Adria took the stage from Keller; it only became more pronounced as the packed crowd rose to its feet, raining applause, admiration and love on the Spanish master. Adria accepted the response with aplomb, and gave it right back to the audience -- and to his fellow Spanish cocineros, who were standing off to the side. He brought each one up to join him on the stage for a rousing thank-you to the conference organizers, sponsors and participants. Once this emotional release subsided, Adria got down to what everyone had been waiting for -- his discussion and demonstration.

      Ferran Adria, with eyes sparkling like the finest cava, began speaking Spanish in a voice as gravelly as the beaches of the Costa Brava, while Conference Chairman Jose Andres translated. The crowd, hushed and straining for every word, moved forward in their seats as Adria explained El Bulli and himself, with a lesson in recent culinary history thrown in. Ferran explained that El Bulli is not a business. While offshoots of El Bulli are operated on a for-profit basis, the restaurant runs without profit as a primary motivation. For example, he said, the greatest difficulty they have is distributing reservations. Given the extraordinary demand and the severely limited supply, he explained that they could simply raise the price of a meal to the point where the supply and demand met. Indeed, the price of a meal at El Bulli is in itself quite reasonable given the stature of the restaurant and well within means of most motivated diners should they be able to get there, and this is how Adria prefers it. He stated that he was not interested in cooking solely for those with the most money. He prefers to work for people with a true interest in exploring the limits of cooking with him. To this end he showed a short film depicting “A Day in the Life . . .” of El Bulli set to the Beatles’ song of the same name. The film showed a couple’s response to the experience.

      Ferran’s voyage into creativity began with a visit to Jacques Maxima at Le Chanticleer Restaurant in Nice, France. He learned from Maxima that to be creative is not to copy. This idea changed his entire approach to cooking -- from making classic cuisine to making his own. Aware of elaborate books of French cuisine, Adria resolved to catalogue his work, the results of which are the richly detailed El Bulli books, published by period. These books, as wonderful as they are, are huge and extremely expensive. During his presentation, Adria announced -- and demonstrated -- that the individual dishes photographed and described in a chronology within each book are all now available online at elbulli.com.

      He finished the philosophical discussion by talking about the general style of haute cuisine that he and others are engaged in. While others have coined the term “molecular gastronomy” to highlight the scientific component of the creativity involved, Adria rejected it, saying that all cooking is molecular: most of his techniques are in fact rather simple and don’t employ radical new technology. Most of the technology that they do use has been around for some time; they have simply adapted it to their own purposes. Nevertheless, he applauds contributions to gastronomy from Harold McGee and other food scientists, and welcomes their collaboration in the kitchen. He has yet to find a term that describes the movement: as of now, he feels that there really is no good name for this style of cooking.

      More than any other single thing, Ferran Adria is known for the use of “foams” in cooking. While he is proud of his achievements with foams, he stressed that while appropriate in some circumstances, the real utility of foams is limited. He bemoans their ubiquity -- and wishes to not be blamed for others’ poor deployment of the concept. In the course of describing this and other techniques, Adria made a point of stating that using them should not be inferred as copying. Techniques and concepts are to be used and shared. He invited everyone to learn and harness whatever they found interesting, and to employ it in to their own pursuits.

      Another set of techniques discussed and demonstrated by the master and his assistant, Rafa Morales from Hacienda Benazuza, included three types of spherification. These included the use of calcium chloride (CaCl) and sodium alginate as well as the converse, and exploration of a new agent, gluconodeltalactone. The original combinations of alginate into CaCl for “caviar” production, and CaCl into alginate for larger “spheres” have chemistry-related limits as to what can be sphericized. In private correspondence, Harold McGee explained to me that Adria described encapsulating a mussel in its own juice. While this would make the dish technically an aspic, unlike conventional aspics it remains a liquid. Adria said that though gluconodeltalactone is very new, and they are just beginning to get a handle on it, he is very excited by it. He also demonstrated a machine for spherification on a larger scale than they had originally been able to do, as well as liquid nitrogen and freeze-drying (lyophilization) techniques. At the conclusion of his demonstration -- and thus the Conference -- the audience once again awarded him a standing ovation.

      While Adria’s appearance was the culmination of the conference, the energy it produced was not just because of his stature in the world of gastronomy -- it was also due to the excitement generated by the conference that preceded it. If there had previously been any doubt, Thomas Keller’s welcome of Adria was a clarion: Spanish cuisine has landed on North American shores and is finding a niche in the North American psyche. Spanish cuisine -- in its multifaceted, delicious entirety -- lives here, too.

      + + + + +

      John M. Sconzo, M.D., aka docsconz, is an anesthesiologist practicing in upstate New York. He grew up in Brooklyn in an Italian-American home, in which food was an important component of family life. It still is. His passions include good food, wine and travel. John's gastronomic interests in upstate northeastern New York involve finding top-notch local producers of ingredients and those who use them well. A dedicated amateur, John has no plans to ditch his current career for one in the food industry. Host, New York.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...