Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create an account.

paulraphael

Locust bean gum

Recommended Posts

I've been experimenting with stabilizer blends for ice cream, and am currently using a variation on one recommended by Francisco Migoya:  xanthan, locust bean gum, and guar gum in a ratio of about 1 : 1.4 : 1.4.

 

My one hesitation with this blend is that LCB requires a lot of heat (according to some sources) to hydrate fully. Modernist Cuisine and a couple of other sources say it needs to go above 90°C.  I'd like to not have to cook the dairy this high.

 

Some other sources say LCB only needs 80°C, and others say 47°C.

 

This is a lot of variation, and I'm curious if it's because of actual variation in versions of the product, different standards of solubility (including different amounts of time), or because someone's misinformed.

 

If it's just a question of time, I'm wondering if I can get away with lower temperatures, because my base has some egg custard and needs to be cooked anyhow (I cook in a water bath for about 30 minutes but could go longer ... temperature of at least 79°C) and the mix then ages at least 8 hours in the fridge.

 

Any thoughts?

 

Edited to add: I've been trying to get information from the manufacturer, with no success. My LCB comes from CP Kelco, who were nice enough to send a sample, but I can't get them to return email or phone calls. 


Edited by paulraphael (log)
  • Like 1

Share this post


Link to post
Share on other sites

Finally got a scientist on the phone. She said 80°C. I asked what happens at lower temps and she said that fractionally smaller amounts of the gum would hydrate. So, at 75°C, maybe only 80% or so of the gum would disolve and contribute to thickening. And she said this was independent of the time spent at temperature. 

 

She said this had to do with normal organic variation from one molecule to the next.


Edited by paulraphael (log)
  • Like 1

Share this post


Link to post
Share on other sites

Would you be able to hydrate the gum in a small amount of milk at the higher temp then add it to your ice cream base after cooling slightly? Not sure how these things work, just an idea.

Share this post


Link to post
Share on other sites

Yes, that would be possible. I think I won't have to do this, though. The temperature the manufacturer gave me is probably as low as I need to go. There's egg custard in my recipe as well, and that needs cooking.

Share this post


Link to post
Share on other sites

I've been experimenting with stabilizer blends for ice cream, and am currently using a variation on one recommended by Francisco Migoya:  xanthan, locust bean gum, and guar gum in a ratio of about 1 : 1.4 : 1.4.

 

My one hesitation with this blend is that LCB requires a lot of heat (according to some sources) to hydrate fully. Modernist Cuisine and a couple of other sources say it needs to go above 90°C.  I'd like to not have to cook the dairy this high.

 

Some other sources say LCB only needs 80°C, and others say 47°C.

 

This is a lot of variation, and I'm curious if it's because of actual variation in versions of the product, different standards of solubility (including different amounts of time), or because someone's misinformed.

 

If it's just a question of time, I'm wondering if I can get away with lower temperatures, because my base has some egg custard and needs to be cooked anyhow (I cook in a water bath for about 30 minutes but could go longer ... temperature of at least 79°C) and the mix then ages at least 8 hours in the fridge.

 

Any thoughts?

 

Edited to add: I've been trying to get information from the manufacturer, with no success. My LCB comes from CP Kelco, who were nice enough to send a sample, but I can't get them to return email or phone calls. 

 

Hope we can still help with this one! The higher the temperature, the more of it will hydrate. You can absolutely use lower temperatures, but less of it will hydrate. If you decide to use a lower temp, we recommend increasing the amount of LCB by 20%.

  • Like 1

Share this post


Link to post
Share on other sites

Thank you Caren. 

 

I suspected there were hydrocolloid gurus hiding in the shadows. Do you know much about ice cream stabilizer blends in general?

Share this post


Link to post
Share on other sites
On 6/8/2014 at 11:49 AM, paulraphael said:

 

I've been experimenting with stabilizer blends for ice cream, and am currently using a variation on one recommended by Francisco Migoya:  xanthan, locust bean gum, and guar gum in a ratio of about 1 : 1.4 : 1.4.

 

How much of the mixture do you put into a batch of ice cream?  I'm currently using a recipe that starts at 1,000 g and is reduced to 850 g before putting it into the ice bath.

Share this post


Link to post
Share on other sites

I forgot this topic existed. And am glad no one was overly confused by my abbreviating locust bean gum "lcb."

 

I've done a lot of experimenting since last year and have completely ditched this Migoya formula, but not locust bean gum, which seems to be the best of the conventional gums for taming ice crystals. 

 

The xanthan / lbg combination forms a pretty strong gel. The base will turn into a thick pudding when it ages, and will need to be turned into a fluid gel with a stick blender before you can spin it. Even then, the viscosity will be very high; more than what's ideal for most ice creams. This formula might work for a very low-fat or no-fat ice cream that benefits from the gelling (to make up for a lack of creaminess. 

 

Xanthan is also not the most efficient stabilizer. I've ditched it and now use a more conventional combination of locust, guar, and carrageenan (I use lambda carrageenan, because it doesn't form a gel in dairy). 

 

Right now my favorite ratio is 4 : 2 : 1, with the total of this used at around 0.15%. There's a lot of wiggle room. If you want more body and chew, increase the guar. If you want a thicker, creamier melted viscosity, increase the carrageenan. 

 

I've written about this in much greater detail here

Share this post


Link to post
Share on other sites

  • Similar Content

    • By eG Forums Host
      Introduction

      Welcome to the index for the Sous Vide: Recipes, Techniques, & Equipment topic, one of the largest and most influential topics on eG Forums. (The topic has been closed to keep the index stable and reliable; you can find another general SV discussion topic here.) This index is intended to help you navigate the thousands of posts and discussions to make this rich resource more useful and accessible.

      In order to understand sous vide cooking, it's best to clear up some misconceptions and explain some basics. Sous vide cooking involves vacuum-sealing food in a plastic bag and cooking it in a water bath at precise temperatures. Though it translates literally as "under vacuum," "Sous vide" is often taken to mean "under pressure," which is a misnomer; not all SV cooking involves food cooked in conditions that exceed atmospheric pressure. (See below.) In addition, calculations for SV cooking involve not only time and temperature but also thickness. Finally, due to the anaerobic conditions inside the bag and the low temperatures used, food safety issues are paramount.

      You can read the basics of SV cooking and equipment here. In the summer of 2005, Nathan Myhrvold (Society member nathanm) posted this informative, "I'm now going to answer my own initial questions" post, which addresses just about everything up to that point. For what came next, read on -- and be sure to order Nathan Myhrvold's highly anticipated Modernist Cuisine book, due in spring 2011.

      As with all indexes of on-going discussions, this one has limitations. We've done our best to create a user-friendly taxonomy emphasizing the categories that have come up repeatedly. In addition, the science, technology, and recipes changed over time, and opinions varied greatly, so be sure to read updated information whenever possible.

      Therefore, we strongly encourage you to keep these issues in mind when reading the topic, and particularly when considering controversial topics related to food safety, doneness, delta T cooking, and so on. Don't read a first post's definitive claim without reading down the topic, where you'll likely find discussion, if not heated debate or refutation, of that claim. Links go to the first post in a series that may be discontinuous, so be sure to scan a bit more to get the full discussion.

      Recipes were chosen based solely on having a clear set of information, not on merit. Indeed, we've included several stated failures for reference. Where possible, recipes include temperature and time in the link label -- but remember that thickness is also a crucial variable in many SV preparations. (See below for more information on thickness.)

      History, Philosophy & Value of SV/LTLT Cooking

      Over the years, we've talked quite a bit about SV as a concept, starting with this discussion about how SV cooking got started. There have also been several people who asked, Why bother with SV in the first place? (See also this discussion.) What with all the electronics and plastic bags, we asked: Does SV food lack passion? Finally, there have been several discussions about the value of SV cooking in other eG Forums topics, such as the future of SV cooking, No More Sous Vide -- PLEASE!, is SV "real cooking," and what's the appeal of SV?

      Those who embrace SV initially seek ideas about the best applications for their new equipment. Discussions have focused on what a first SV meal should be -- see also this discussion -- and on the items for which SV/LTLT cooking is best suited. There's much more along those lines here, here, and here.

      Vacuums and Pressure in Sous Vide Cooking

      As mentioned above, there has been great confusion about vacuums, pressure, and their role SV cooking. Here is a selection of discussion points on the subject, arranged chronologically; please note that later posts in a given discussion may refute earlier ones:

      Do you need a vacuum for SV cooking, and, if so, why? What exactly is a "vacuum"? Click here, here, and ff. Are items in vacuum-sealed bags "under pressure"? Does a vacuum sealer create a vacuum inside the bag? Do you really need a vacuum, or can you use ZipLoc bags? Also see here, here, and here. If "sous vide" means "under pressure," aren't the items in the bag under pressure? There is more along these lines to be found in this discussion.  

      The Charts

      We've collected the most important of many charts in the SV topic here. Standing above the rest are Nathan Myhrvold's charts for cooking time versus thickness and desired core temperature. We worked with him to create these three reformatted protein tables, for beef, fish, and chicken & pork.

      Nathan provides additional information on his charts here. Information on how to read these charts can be found in this post. For an explanation of "rest time" in Nathan's tables, click here.

      Other Society members helped out as well. Douglas Baldwin references his heating time table for different geometric factors (slab/cylinder/sphere) here; the pdf itself can be found here. pounce created a post with all three tables as neatly formatted images. derekslager created two monospace font charts of Nathan's meat table and his fish table.

      Camano Chef created a cumulative chart with information gathered from other sources including Thomas Keller's Ad Hoc. Douglas Baldwin shared this chart devoted to pasteurizing poultry. PedroG detailed heat loss and steady state energy consumption of sous vide cookers in these charts.

      Finally, there is also an eG Forums topic on cooling rates that may be of interest.

      Acknowledgment & Comments

      This index was built by Chris Amirault, Director, eG Forums. It was reviewed by the eGullet Society volunteer team as well as many Society members. Please send questions or comments to Chris via messenger or email.
       
       
    • By Paul Bacino
      Wonder if someone could get me in the ballpark..the amount of Transglutamase...to make scallop noodles..    %  I mean
       
      ill use a food processor..to purée the scallop..  then inject into a water or broth..to cook?
    • By TomRahav
      Hi,
      I've tried to make the spherical mussels recipe from the Modernist Cuisine books and it didn't work as I expected, so I would appreciate any advice that may help here.
      The recipe calls for calcium gluconate which I couldn't get hold of, so I replaced it with calcium lactate gluconate that I had at home. I used the same ration (2.5%)
      When I tried to create the spheres in the sodium alginate bath I encountered two main problems;
      1. instead of spheres the mixture just stayed as uneven shape on the surface. The bath was 1Kg. water with 5gr. sodium alginate and I let it rest in the fridge for 24 hours before using it so I think the problem is not here. However, the mussels jus mixture (100gr. mussels jus, 0.5gr. xanthin gum and and 2.5gr. calcium lactate gluconate) had a lot of air bubbles in it. Can that be the issue?
      2. In the book the spheres seem to be completely transparent whereas my mussels jus mixture was pretty white and opaque. Is it because I replaced calcium gluconate with calcium lactate gluconate? Or maybe it's because the jus itself should be clarified before it is used?
      Thanks in advance for your support,
      Tom.
    • By chriswrightcycles
      Good afternoon everyone!
       
      I currently own a MiniPack MVS31x chamber style vacuum sealer and am wondering if a Polycience vacuum canister will work in my machine? The intended use is for making a larger batch of aerated mousse. 
    • By boombonniewhale
      Hello! I was wondering if anyone on here has tried using an induction cooktop with confection making (caramels, fondant, marshmallows ect...). My stove has literally three settings, and the low setting still burns sugar and there is no such thing as maintaining any sort of "simmer". I was looking into getting a cooktop and buying some copper sugar pots and mauviel makes this thing that goes inbetween. I would love to hear any input into this idea or your experiences!
       
      ~Sarah
  • Recently Browsing   0 members

    No registered users viewing this page.

×