Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

Edit History

There is no edit history to show, or this comment was edited by a moderator.

  • Similar Content

    • By eglies
      Hello everyone!
       
      I hope you are all safe and well  
       
      I have a question regarding Chef Rubber Natural Colours. Its very difficult to get them here in Europe (if anyone has any contacts or knows a company that sells that would be great) and anyone that has used this line, what colours would you recommend? 
       
      Thank you!
       
    • By eglies
      Hello everyone! 
       
      Im in need of your expertise! Ive been having troubles with my machine, or maybe not even my machine. 
      Ive attached an image (hopefully its clear) to show you a mould that has different tempering problems. I dont understand how one mould can have several different tempering issues. 
      Ive also been advised to have my machine between 30C-31C, however all ive known is to use dark chocolate between 31-32C. Ive done tests from 30C-32C and none have the outcome that is expected, that shiny chocolate. 
      Please share your knowledge  I really need it!! 
       
      Thank you!!! 
       

    • By Trufflenaut
      I need some advice on a safe(ish), easy, and fast way to cut buttermints   I often make buttermints for friends for the holidays, and have run into problems cutting them into bite size pieces before the sugar cools and starts to crystallize too much, so I'm looking for ideas on how to do it more quickly so I can do larger batches.  Note that I am doing this at home and have very little budget, but on the plus side I don't need to end up with perfectly uniform pieces.
       
      The basic process for making the buttermints is:
      1. cook butter and sugar to 260 degrees
      2. pour out onto buttered marble slab and let cool slightly
      3. add color and flavor, and pull like taffy while it cools further
      4. when it just starts to show signs of crystallizing, roll into ropes and cut before it crystallizes much further (I have maybe 2 minutes if I'm lucky to get all the cutting done)
       
      The main problem I run into is that when handling the candy during steps 3 and 4, my hands need to be buttered so the candy doesn't stick to me, and even if I quickly wash my hands, any cutting tool needs to also be buttered to prevent sticking, and basically it's nearly impossible to maintain a good grip on anything.  The second problem is that the candy at this point is hard enough that if I try to snip it with scissors it will tend to slide along the blade instead of getting cut, yet it is still plastic enough that if I pick it up it will tend to sag under its weight and thin out too much while I'm concentrating on getting the scissors to cut right.  My best results so far have been with leaving the candy on the marble and cutting it with a pastry scraper, but pressing down hard enough to cut all the way through with a slippery (due to the aforementioned buttered hands) pastry scraper while trying not to gouge the marble underneath is not particularly fun.  I did try pruning shears once because the curved blade holds the candy in place instead of sliding along the blade, which worked fine except for the fear of lopping off parts of a finger made it too nerve-wracking to be done quickly.
       
      Basically, I'd love to find something that works like this, but for something with the consistency of a hard caramel:
       
       
       
      Any ideas?
      -Trufflenaut
       
    • By onemorebitedelara.com
      Has anyone used Valrhona Absolut Crystal neutral glaze particularly to thicken a coulis or to glaze a tart?  If so, how did you like it and is there another glaze you think worked as well but is less expensive or can be purchased in smaller quantities?  
    • By Galchic
      Hello, folks, thanks for reading.
       
      My husband thinks, I should start selling my popcorn seasonings (which I make for my family), it’s a good product. But I'm not sure if it’s interesting to other people... So, what do you think, guys?
       
      Our story: 
      We’ve bought an air popper machine, but popcorn came out pretty tasteless. Then, we’ve bought different “popcorn seasoning” mixes... But it always ends with all the seasoning at the bottom of the bowl. Then, we've added butter, oil and so on before seasoning...  we got soggy, chewy popcorn. Lot’s of disappointments…
       
      When we almost gave up… the magic happened! I figured out the way to make seasonings that:
      Stick to popcorn, but not sticky to fingers (or T-shirt  , Easy to apply, May be pre cooked in bulk and stored… And popcorn appears crunchy, tasty, thoroughly covered with seasoning.  
      Sounds good, yep? Now, when I want to treat myself  - I only need 2 mins to turn tasteless popped popcorn to a real treat.  
      The only moment - it request 1 extra effort: after you toss it over popcorn, you need to microwave it for 1 min, and stir after.
       
      So, I was wondering, if you like popcorn like myself - would this seasoning be interesting for you to purchase? Are you ready for a little extra work (microwave & stir) in the goal to flavor popcorn, or it feels too much effort?
       
      As I have no experience in manufacturing and retail, your answers would help me to make a very important decision - to dive in or not... 
       
      Thanks in advance for your answers, it means the world to me.
       
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...