Jump to content
  • Welcome to the eG Forums, a service of the eGullet Society for Culinary Arts & Letters. The Society is a 501(c)3 not-for-profit organization dedicated to the advancement of the culinary arts. These advertising-free forums are provided free of charge through donations from Society members. Anyone may read the forums, but to post you must create a free account.

Combi Ovens


cookingincali

Recommended Posts

I am researching combi-ovens for the restaurant. I have used Rational and Alto Sham before and I loved the capabilities. They are just to computerized for my needs. I dont need to start cooking 700#s of roast beef from frozen, from a computer at my house. No thanks. I basically just want full control over heat, steam, convection and a few other features. I have seen them made by hobart, blodgett, cadco. Does anyone have any experience using any of these less "popular" brands? Also gas or electric? If I have the option in the kitchen, which unit should I choose? Thanks for any tips you might have? All my best

Link to comment
Share on other sites

  • 1 year later...

I see ads in Food Arts for various ovens that do more than heat and convection. They sound magical. What they do exactly, I don't know. Steam may be involved. Or elves.

Can someone explain these things? Are there home units?

Sent from my Droid using Tapatalk

Link to comment
Share on other sites

They steam, roast, bake, etc. They have grates that you can put in and preheat and 'grill', so to speak. I've gone to a demo for one (and used an early version in university). I don't know if they make home versions.

According to the sales team at the demo, a lot of places that sell whole, roasted chickens are using huge combis. The oven has a probe (or several) that you stick in the food when it goes in. You can program the oven to stop cooking and hold the food at a certain temperature for hours. So you could potentially throw a roast in the oven in the evening and get to work in the morning and have it be cooked to the perfect temperature.

Link to comment
Share on other sites

It all depends on your definition of home version.. I purchased two brand new Rational combis for a kosher kitchen about 5 years ago and each one was about $20,000 (equipment and set-up cost) and they didn't have ALL the bells and whistles. With some practice, you can use one as an oven, a steamer, a smoker, a proofer and much more. As Pam mentioned, you can start your product the day before and not have to worry about it because they are very good at maintaining temperature and you can create a temp log for that amount of time (which some health inspectors require). You can program them to cook at a certain temp for a certain time and then switch to a different temp for another length of time, etc, etc

Combi means "combination" which is a mix of the hot, dry air of an oven and the "wet" heat of a steamer. This is particularly good for minimizing loss from expensive cuts of meat while allowing the end-user to cook at a faster speed than regular convection ovens.

Link to comment
Share on other sites

If you have access to a copy of Modernist Cuisine, Nathanm devotes many pages to Combi ovens and Cvaps. Probably, the largest producer is Rational, a German company, but they have a full US sales company. Rational makes several sizes with the 61SCC (self cooking center) which is the smallest in their range. They are wonderful, have tremendous capability for many types of products and can perform a wide range of tasks. However, they are expensive and even the smallest is very large. When I bought one for my home, the first discovery was that there is just not enough room even in a large kitchen to place them unless you are starting placement from scratch...mine is now in a basement room where I have a second kitchen. Next, they require a dedicated water hook-up and it is suggested that they be placed with proper venting with a hood to capture steam when the door opens. Finally, they are not cheap to install because they require 240V, three phase electric service (like Nathanm has in The Cooking Lab). Your electric company generally only wants to make three phase available to industrial customers, but it can be brought to a home. Alternatively, one can have an inverter installed, but that is also expensive.

Recently, I ran across a small mini combi from Electrolux. This will run on 120V from what I understand, is portable, has a water reservoir so it does not need a dedicated supply and costs a couple thousand dollars not 5 place numbers.

If you can attend the National Restaurant Show in Chicago at the end of May, you can see many Combi ovens from most of the manufacturers.

Edited by JBailey (log)

"A cloud o' dust! Could be most anything. Even a whirling dervish.

That, gentlemen, is the whirlingest dervish of them all." - The Professionals by Richard Brooks

Link to comment
Share on other sites

I purchased an Alto-Shaam double combi at work about 5 years ago. They're a very, very expensive piece of equipment and the size of a small house. Getting it in our kitchen was a challenge and we ended up having to cut a notch out of our hood in order to get it under the hood. The plumbing hook-up was also something of a challenge. They can do just about everything, and in less time, but it does take some patience and practice to get things right. Every manufacturer will do pretty comprehensive training (which is very useful) with the staff once an operation has purchased one. They are very good for high volume operations. The big hotels and casinos in Las Vegas have banks of combis that are well used all day long.

Our combi is not used as much as it should be, partly because some of my employees find it intimidating. If I had it to do all over, I would not buy a combi, it was not the best use of our equipment resources.

Link to comment
Share on other sites

Combis are not uncommon in the EU (at least in Northern Europe; e.g. Siemens and Gaggenau make models), but they do run more than a standard convection oven, so I unless you have a definite, extensive use for the steam feature, I wouldn't recommend that version (here the term is also applied to conventional/microwave combinations, too).

Michaela, aka "Mjx"
Manager, eG Forums
mscioscia@egstaff.org

Link to comment
Share on other sites

The brochure on the Electrolux USA website says it needs 230 V 1-phase power, but the Globe Equipment web site says 110 volt and lists for $1,905.70 with an MSRP of $3,400. Even at almost 2 grand, it's tempting if it really would be a countertop combi oven. After all, that's only a little more than 3 sets of Modernist Cuisine.

Link to comment
Share on other sites

The US version is 110V, but it comes with what is called a NEMA5 plug - one blade horizontal and one blade vertical plus the ground. What this really is from my research is an outlet and breaker on a 20 amp circuit. This Electrolux draws more power so you need an upgraded circuit, but many modern circuits are already of that amp size, you merely need to change out the wall outlet. It also should be a simple thing for an electrician to help you with and is not a big project. You can look at your breaker box to read if the outlets in your kitchen are already 20 amps or not.

"A cloud o' dust! Could be most anything. Even a whirling dervish.

That, gentlemen, is the whirlingest dervish of them all." - The Professionals by Richard Brooks

Link to comment
Share on other sites

You can get the Rational ovens with 120v power. It is important to have enough space, water service, venting (make sure the hood extends at least a foot over the front of the oven), etc. That said, the ovens are remarkable. You can do things that you'd do in an ordinary oven, but faster and more consistently. You can also do things you can't do in an ordinary oven: Cook things sous vide, in a bag; cook things at your target temperature, as in sous vide, but without a bag, re heat with humidity, use the scientific cooking control programs for just about anything, make your own programs (e.g. Modernist Cuisine's combi-oven ribeye), etc. Plus the cleaning cycle is fantastic: Put chemical tablets in the oven and walk away; never touch the inside (never!) and the oven looks as good as the day you bought it. The comment in this thread about the section on combi ovens in Modernist Cuisine is correct. In fact, that section is much (much!) more helpful in explaining what the ovens then any of the Rational material.

Link to comment
Share on other sites

I purchased an Alto-Shaam double combi at work about 5 years ago. They're a very, very expensive piece of equipment and the size of a small house. Getting it in our kitchen was a challenge and we ended up having to cut a notch out of our hood in order to get it under the hood. The plumbing hook-up was also something of a challenge. They can do just about everything, and in less time, but it does take some patience and practice to get things right. Every manufacturer will do pretty comprehensive training (which is very useful) with the staff once an operation has purchased one. They are very good for high volume operations. The big hotels and casinos in Las Vegas have banks of combis that are well used all day long.

Our combi is not used as much as it should be, partly because some of my employees find it intimidating. If I had it to do all over, I would not buy a combi, it was not the best use of our equipment resources.

We have a combi where I work but as we do very little (aka none) serious cooking on-site and only finish catering events and bake cookies on-site, it pretty much doesn't get used at all. Couple that with the fact that everyone who was here when it was installed has moved on, and the controls are not instinctive, and there is even less incentive to use it. We have a regular convection oven that gets 95% of the use. Oh yeah, and it isn't vented properly either! :blink:

Link to comment
Share on other sites

Are there home units?

Sharp makes a convection/steam/microwave combination targeting the home market. It runs just under $1000. I don't know how it compares to the pro units but the price point is certainly lower.

Chief Scientist / Amateur Cook

MadVal, Seattle, WA

Proud signatory to the eG Ethics code

Link to comment
Share on other sites

  • 2 weeks later...

I have the Combi from Electrolux. I use it all the time instead of my very expensive thermador range. I find that bread, roasts and steaming applications are perfect. I just wish the oven was bigger with a bigger reservoir, but I think it would defeat it's intended purpose.

Link to comment
Share on other sites

I have the Gaggenau plummbed version. I love it. It cooks really well, stesms really well. It was expensive but I just spent $600 on a cookbook so what the hell...... I have only had it a few months so I'm still learning.

Mike

Link to comment
Share on other sites

  • 1 month later...

I think thats the version I have. How do you plan to use it? It really is very versatile and there is alot of ground to cover.

Its great as a steamer, I throw some broccoli and fish in it and voila! Quick healthy meal.

It can also make rice and pasta which I have done successfully, but not many times. The steam injection is great for baking. Reheating baked goods with steam makes day old bread/buns almost like new. I have made roasts with good success (though the cavity is small and tough to replace a full size oven for a large household).

Tell me your goals and maybe I can help more.

Mike

Link to comment
Share on other sites

I'm considering the Gaggenau BS 280 (30" combi). Can you tell me more about your experience with the Gaggenau?

We don't have a combi oven, but do have the Gaggenau BO 270 oven and also the CE 490 stovetop, and the performance and reliability are top notch for both; great brand.

Michaela, aka "Mjx"
Manager, eG Forums
mscioscia@egstaff.org

Link to comment
Share on other sites

  • 1 year later...

First:

So, from reading Modernist Cuisine, all of their programs make use of either 100% humidity or 0%, the former to control the wet-bulb temperature for cook-to-temp applications, and the latter for drying/browning. Further, there's discussion about the general uselessness of humidity settings that are able to be set, but not realized.

My first question is...are there any practical reasons for selecting partial humidity? If so, why? Sure, there are recipies/programs specified by the manufacturer that suggest step-wise cooking programs where the humidity is decreased as the temperature is increased, but do the results warrant this approach vs the MC approach to humidity?

Second:

Delta-Temp cooking...Any interesting applications of this mode? I get its usefulness in large roasts and "Gentle" cooking, but are there other uses for it?

Link to comment
Share on other sites

My first question is...are there any practical reasons for selecting partial humidity? If so, why?

Google "CVAP Cooking" and understand the difference between CVAP and sous vide.

http://blog.cvap.com...sous-vide-cvap/

Rethermalizing food at 285°F and 80% humidity in a combi avoids drying the food out as would occur at 285°F in a dry oven.

Link to comment
Share on other sites

×
×
  • Create New...