Jump to content

jedovaty

participating member
  • Posts

    242
  • Joined

  • Last visited

Posts posted by jedovaty

  1. 13 minutes ago, heidih said:

    Per website ;)

    Sfoglini pasta is made and packaged with a lot of care in New York’s Hudson Valley. It's quality you can taste from the field to the bowl.

    In my defense, when I was a kid, I'd yell to mom with the fridge door open asking where the milk was, while staring right at it. 😝

    • Haha 5
  2. I splurged and picked up a bunch of boxes as gifts to close friends a couple months ago.  It arrived last week, the noodles look a lot "thicker" than I was expecting.  To be tried in a few weeks when I've got time to make sauce, looks promising!

     

    I was really surprised it was shipped from NY.. I thought it was made in CA. 🤷‍♂️

    • Like 1
  3. I don't have enough experience with agar agar, I tried it a couple times in the past and recall the heating was required to activate, just like the various starches.  I did not know gelatin would gel without being heated.  If you try the gelatin, let us know how it works, I'm really curious!

     

    If you don't want to heat the thing, then maybe your best solution is to try the recipe as is, and if successful, make it in two separate batches.

     

    Good luck!

    • Like 1
  4. I've completed a few tests, just to wrap up any lose ends.  Following the technique of that Bruno dude's video I linked to earlier in making these pralines (3 coatings in pan).

    1. Shaking the pan a lot near the end causes more white peaks, but a smoother praline

    2. After three sugar coatings, I cannot tell the difference between roasted and unroasted hazelnuts and almonds, and even less so once baked into the brioche

    3. Skinning the nuts doesn't really do much in terms of flavor or mouthfeel

    4. Both the vegan and bug options of tru-color held up in the oven with my sourdough brioche

    5. To maintain color, I had to use the tru-color in each stage, 15-20 drops (2-3g I think?)

    6. I added various amounts of glucose from 5g to 20g during each of the three stages and couldn't tell what it did, if anything

    7. Need to add WAY more pralines into the brioche dough at the end, I was doing 50% by weight, and they just migrated to the edges during final proof, rather than remaining inside

     

    Picture shows tru-color food coloring before baking.. bugs on left, beets on right.  In the pastry pic, I forgot which side was what, but, color clearly held up in both.  Thanks for playing along and all the help in this thread :)  Brioche in the picture looks a bit gooey and doesn't do it justice, I opened it before allowing it to cool, but was one of the softest and fluffiest I've made (almost ate the whole thing in one sitting oops).

    pink pralines.jpg

    brioche st genix.jpg

    • Delicious 1
  5. Nooo, it'll be a while before I try anything.  I'm on vacation in toronto right now 😁, and it'll be a month or two before I make more chocolate.

     

    Both ideas will be challenging based on how I make chocolate.  Dump/scrape a large amount is problematic because I make so little ~900g, i.e. I'll have to probably make a double batch which I'm willing to try.  The piping method seems like it will be tricky keeping the chocolate at the temperature where it flows evenly, without getting lumpy.  Not to mention extra messy, considering I'm already the world's clumsiest derp :P 

     

    Will report back when I try one or both methods!

    • Like 1
  6. Had another thought.  With my specific results, the big mark is always precisely where I first drop the molten chocolate.  I'm just pouring a very steady 50g chocolate directly into each mold, since I work with at most 2lbs at a time, in order to minimize waste.  You all think results would be different if I let the chocolate "drop" on another part of the mold, fill the whole thing up, then scrape off?  I see the "pros" doing it this way, but again, I have such a small amount of chocolate, this method wouldn't work well with my lack of scraping experience (I suppose I could increase the amount of chocolate I make, but then, I want a roaster that can handle more).

  7. JNW: your thread from a while back is where I learned of KB's recommendation to try different molds, and her experience with the tomrics.

     

    I found another thread, and here, the poster has tried chilling faster as well as waiting for crystallization before putting into the fridge.

     

    It seems a lot of others with the tomric molds are having this issue.  I've let mine sit overnight in the fridge before, still got the marks.  This may have to do with different chilling rates between the surface exposed to fridge/ambient air, and the part touching the plastic mold, which in the case of the tomric molds, could be exacerbated by the base having that air gap, thus creating a greater insulation in addition to that of the plastic.  If this is partially or wholly to blame, then a very slow chilling would be better than a fast one, but, that will be a problem with using silk as a tempering.  Add to that the theories of the larger surface area of these bar molds, and of course now it's clear this isn't really going to work.

     

    Wonder what makes the tomric molds more susceptible to this issue versus the other brands?  Is it the shape of the base and the air cavity it creates?  Maybe a different material?

     

    5 years with these four molds, guess it's okay to now pick some up new ones in the interests of improving the end product.  I started with using lids of reditainers, that was fun having a circular shaped mold, but a pain to wrap.  I've always liked these thin break-away bars, easier to portion and share.

     

     

    • Like 1
  8. That search term brought up only three threads, this was one of them, however, it gave me a place to start and I found a few other suggestions, which include:

     - let sit at room temp until you see crystallization before putting into fridge

     - different molds

     

    I've just wrapped up my chocolate making, and will revist in a few months :)  Thanks for the help!

  9. I can't get rid of that shiny spot where the chocolate first hits the mold.  Here's what I've tried:

     - super clean the mold

     - extra polish on mold with super soft microfiber cloth

     - more expensive, professional mold

     - two tempering methods (bowl over hot/cold water, silk)

     - bringing the mold to 90-95F

     

    Attached photo shows my typical result (photo with 4 bars) and the best results so far (photo with 3 bars).  The best result came from the mold being at roughly 90F this time.  The chocolate I make is from home-roasted beans, using a little cacao butter and sugar, no other ingredients.  I usually do silk tempering right in the wet grinder, but have wanted to improve the "snap", so changed recently to pouring the contents into a bowl, heating to 130F for complete melting, then chilling to roughly 93-95F, adding grated silk, mixing like crazy, then pouring into the molds, smack on the counter rapidly several times, and into the fridge to chill quickly, ~30 minutes. 

     

    I make chocolate in kitchen ambient range 60-75F, and humidity typically averages around 65%, although it can be as low as 40% or high as 80%, since I keep my windows open and live near the ocean.

     

    Can it get any better, or is this the best one can accomplish at home? 

     

    I'm 5-6 years into this hobby and finally starting to tweak these finer points :)

    typical results.jpg

    best results.jpg

  10. Hi:  I temper chocolate with homemade "silk".  I've found I have to rapidly cool the chocolate to prevent blooming as well as loss of temper, i.e. put it in the fridge for 30-60 minutes.  I'm using the fancy pricey GP-610 tomric molds, filling each bar with ~50g dark chocolate.

     

    Blooming always occurs if I let it set slowly at room temp, which ranges 60-75F.  Does this sound right, or am I potentially doing something wrong?

     

    I'm asking this question to help me troubleshoot another issue (which I'll bring up later if needed, trying to figure things out on my own ;))

     

    PS: fwiw, this is a hobby, I make a few bars every couple months for fun to taste varieties of cacao I roast.  Not a commercial operation.

  11. Hi!  I purchased this Shimpo-Nidec mini slab roller to make my life easier with laminated doughs (before all the DIY and neato fancy ones started showing up on etsy), but, I'm just not using it enough and I need the space for my hobby.  The Konbi restaurant in LA area uses this roller (it's orange though), check out all the videos for glimpses of it in action.  I've had the Konbi pain au chocolat, and they are pretty darn tasty.  They will source and sell it to you for about $1,500, although, you can get it new for $500-600 (I paid $529 for it).  I'm asking $400 since it is used, but, I take very good care of my things.

     

    The unit came with a board and canvas specifically for clay, the wood board could make shipping tricky.  If you want the board and canvas, I'll include them, but I'm not sure they are food safe.  If you look through the konbi videos above, you'll see they are using a custom board of sorts.  I did a little prelim work here, trying to decide whether to cut my own from wood or get a plastic cutting board but never pulled the trigger on anything, had other priorities at the time.  I use the board with parchment paper and it was really annoying, the paper would slide around.  Once over that aggravation, the resulting doughs were excellent and much more uniform than had I rolled them out by hand.

     

    If you are in southern california, I'm happy to meet you half-way and so I don't have to ship.  I also make occasional trips to northern California bay area, and I have various conferences I attend for work in the second half of the year around the US, so I am always happy to drag it with me on the plane.  I haven't figured out how to ship this thing yet.. I'll split it with you whatever it is.  I really don't want to ship, so one of you in California buy this 😁

     

    BTW, this thing works very well for inverse laminated doughs, not sure why but was so much easier than regular laminations which do take practice.  Maybe it's because of the parchment paper.  Here's a thread you can see my early attempts at croissant dough, having very little experience making these things.  I've attached pics of my fronch apple thingies I made using inverse laminated dough and deep-fried left overs, very proud of the results!  And yes, yes, one can do these by hand with a rolling pin or dowel quite well.  Don't judge me.

     

    Let me know if you have any questions :)

     

    fronchy apple thingy.jpg

    apple thingy cross section.jpg

    deep fried left over.jpg

    deep fried left over cross section.jpg

    back of tool.jpg

    front of tool.jpg

    serial number sticker.jpg

    tool with board and canvas.jpg

    • Thanks 1
  12. On 6/20/2021 at 7:57 AM, RWood said:

    I have no idea how it would work in sugar, but Trucolor has made a heat stable red food coloring for baking. I bought it to try for Red Velvet cake, but haven't had a need to make it yet, so I can't say what it's like. But you could research and see. 

    Their "liquid baking" product has carmine in it (the bugs!).  I will get some, easier than making it myself, thank you for this :)

  13. @minas6907That attachment is pricey, yikes.  Converting the stand mixer doesn't seem too difficult.  It's more difficult to commit to NOT doing it, everything in me wants to pursue the perfect pralines for the brioche, but I'm going to have to draw the line now.  I think these would be good in ice cream, too.

    Taking a slight tangent, I tried two different brioche styles side by side: one more typical with milk, eggs, butter, and the other without milk with increased eggs and butter.  It's so strange I could not tell the difference between the two in taste (single blind test), with only a slight color difference!  Also, need to really load up on the pralines in the brioche, I thought I put in a lot but clearly not enough.

  14. Considering these are destined for baking, so will melt a bit, doesn't seem like there's a need to pan them.  You did make me curious so I will do a little research and see if there's an easy way to do this easily at home without many tools.   My first thoughts are turning the stand mixer or my wet grinder into something like this.  Meantime, I'll work on technique, too, I was not shaking pan much and that would probably help reduce the rockiness.

    The instructions in the video I linked to earlier talk about letting excess crystalized sugar remelt in the pan a little at the 2nd and 3rd coating stages.  I did try this, and the bottom of the pan became glossy, but I couldn't get it to stick/coat the nuts anymore.

    Thanks all for the advices this was fun 😁

  15. @RWood Perfect, thank you!

     

    Here's my first try using the basic recipe to understand technique.  I'll experiment later.  Mix of almonds and hazelnuts, raw, with skin.  Tastes like candy with a lot of sugar.  I suspect removing skins will have little to no impact, and roasting the nuts may be too strong, but, we'll see :D  Next batch only change will be some corn syrup (okay sub for glucose, right?) to see what happens to texture.  Also, pan with taller sides.

     

    A fun thing to make, not overly difficult, just a generally clumsy nature means it is time to clean the kitchen 😭

    PXL_20210622_024822018.jpg

    • Like 2
  16. Well, I get it, and it makes sense :)  The english muffins I eat are not the dense ones from the stores, but rather more what you describe about toutons.  I've never had anything called toutons so I will look for them, they sound downright delicious.  I went totally weak in the knees when I tried my first english muffin from Model Bakery in the San Francisco area, they have published their recipe, and perhaps what they are making is technically a touton (albeit fried in butter not animal fat) or a hybrid of the two.  All good, tasty, yummy, mmm.

    • Like 1
  17. 3 hours ago, jimb0 said:

     

    perhaps. ime though a touton is generally thicker and is explicitly fried in grease (often rendered salt pork fat, but not always) while english muffins are usually dry-fried

     

    some restaurants will also do deep-fried toutons, like a savoury yeast doughnut (though newfoundlanders find this controversial)

    I fry mine on ghee or clarified butter.  Makes them super amazing, especially if you push the fermentation as far as you can!  I would be willing to try frying it on some duck fat, too, omg.

    • Like 1
  18. @minas6907 Great, thanks!  The bit about moisture absorption is most helpful, that actually makes sense now considering other confections I've had in the past.  I'll report back with results, I think I'll try with standard food coloring first to make this easy then explore making my own from pulverized bugs later. 

     

    It looks like finding food coloring for baking will need to be ordered online, the local arts/crafts stores only have stuff for icing, bummer.  There's a culinary store near my sibling which carries the "Chefmaster" product line, but can't tell if it is heat stable.

×
×
  • Create New...