Help needed vac packing - sous videModernist
Posted 29 December 2013 - 11:42 PM
The thing is very programmable with vacuum adjustable to 99 seconds.
My question is; often on recipes it says something like 'seal to 95% vacuum' etc. does this refer to 95% of the 99 seconds? As it seems to reach max vacuum by about 60 seconds in any case.
Posted 30 December 2013 - 06:40 AM
If your are using the machine for sous vide cooking, the purpose is to have most of the air out for better heat conduction.
Therefore a good vacuum is not that important. Many people, including me, don't even use a vacuum.
For food storage, that's another story.
Posted 30 December 2013 - 07:28 AM
I think the standard being referred is one atmosphere or 29.92 inches of mercury. As you get more familiar with the machine you will see that the time it takes to reach the target vacuum is primarily a function of how much space is taken up by the object being vacuumed.
- Karlos1968 likes this
Posted 30 December 2013 - 09:17 AM
I mainly got the chamber sealer because I want to experiment with it, already used it on a purée which made it very smooth. Also want to get away from the embossed bags which leave marks on the food!
Posted 30 December 2013 - 10:20 PM
Thanks that makes sense, so it would be 95% of the max vacuum (or should it be least vacuum) achieved?
Correct. That's plenty for sous vide, which as dcarch mentions, is mainly about good contact with the water bath. Stronger vacuums are mainly for compression, e.g., of fruits like watermelon. BTW, which machine are you using?
Posted 31 December 2013 - 12:11 AM
Posted 01 January 2014 - 02:45 AM
Interesting. A little googling turns up two different Chinese companies claiming the product: Hualian (here, here and here) and Dajiang (here and here). Of the two, the first seems more credible to me, though it's also possible the two companies are related. Meanwhile, it seems to be distiributed in the U.S. under the tradename DMC. In Oz, it's credited by one dealer to 3Monkeez. In Indonesia, it's claimed by PowerPack. And so on. Where are you located, by the way? And, if you don't mind explaining, how did you come by the machine?
Posted 01 January 2014 - 11:35 PM
Posted 02 January 2014 - 10:16 AM
That sure looks a lot like the Ary 215 model. (versus the 210, since there is a bottle of oil in the photo, which is also the exact bottle that came with my 215)
- Simon Lewinson likes this
foodblog 1 / 2
I feel sorry for people that don't drink. When they wake up in the morning, that's as good as they're going to feel all day -- Dean Martin
Posted 02 January 2014 - 11:15 AM
I love studying C.V.S.ers
if you go the **** excellent **** ref above and click on the blue 'DMC' ref, then scroll down to almost the bottom of that page you
will see the differences between machine
I am very surprised there are so many varieties of these things.
Posted 02 January 2014 - 07:18 PM
Looks close to what I've got. If you use the pressure gauge you should be able to determine 95% pressure (0.05 bars of pressure) and hit the stop vacuum button then it gets there. If you jot down the number of seconds it took to get there you can program your machine to do that. Note, too much vcacum is only bad for delicate ingredients so a little extra time at maximum vacuum won't hurt other things...
Edited by sculptor, 02 January 2014 - 07:18 PM.
Posted 05 January 2014 - 12:05 AM
Agreed. As discussed upthread, Karlos, it's the pressure reading which counts, not the timer. From the picture, it appears you have the manual. (Which, indeed, was the main thing I was searching for and couldn't find online.) From there, it should be fairly straight forward to make the adjustment sculptor suggests.
Posted 11 January 2014 - 10:35 PM
You mentioned you got the sealer for experimentation, so why not spend some time experimenting with how it works before you try experimenting with recipes? Try sealing bags of water at different temperatures to see what you can get away with before they begin to boil. Use this as your guide. Learn how long you can go before the pressure results in refrigerated liquid boiling. Buy some cheap cuts of meet, say chicken legs, and see how long you can go before you've "cooked" them in the chamber (and throw them away; please don't taste them even if the boiling juices made them less pink). You can even use dried beans or uncooked rice (or things which aren't edible, like spoons and forks) to get a feel for how long you need to seal to remove enough air for full immersion in water.
I regularly use my vacuum to package food that I've cooked for freezing, and this experimentation has been very helpful in my understanding how long I need to wait for things to cool down before I can seal the food after it's been prepared - do I need to put it in the fridge overnight, or will a few ten minute rests surrounded with cold water in the sink be enough? Can I go for 20 seconds before boiling a bag of 80F degree chili, or is it better to wait until the next morning when it's at 38F? Do I need to go longer for food which might trap air, and how long can I go when sealing dry ingredients where the risk of boiling is far less? Where should I place food in the bag to allow for air to easily escape? I find myself disappointed if I'm not minimizing the freezer burn as much as I thought I could when taking things out of the freezer. Spending thirty minutes with the vaccum sealer, thirty bags to potentially waste, and lots of objects has resulted in my learning the sealer like I would a new pot or pan.
As you are spending time learning your vaccuum, be sure to vaccuum seal ice cubes. They'll go from solid to liquid, and then when the pressure rushes back in it'll return to a solid state immediately. Very cool.
I've had a blast with my chamber. No regrets whatsoever in buying it. My wife thought I was crazy to purchase it due to the high price and size, but she's more than willing to assist now that she understands the options it gives us.
My gut tells me you can ignore the explicit directions to "seal to 95%" and instead, just get enough air out so you aren't left with a bag floating in water or the texture you want when you are simply playing with pressure. Learn the timing if your machine through experience and you'll be in great shape to consistently get the pressure you need without wasting bags or destroying the texture of the food you are sealing.
Durham, NC USA
Posted 11 January 2014 - 11:23 PM
Welcome, sir, to the forum. I will respectfully disagree with you on one point. Boiling during vacuum packing bears no resemblance to boiling in the ordinary sense. The latter implicates protein contraction, where the former does not.
Posted 12 January 2014 - 11:05 PM
Posted 13 January 2014 - 02:30 PM
Durham, NC USA
Posted 13 January 2014 - 02:33 PM
well, study study study:
try one meat item ' at the boil ' a similar cut just under the 'boil'
mark carefully and SV identically.
have someone else plate so you don't know what you are testing
I dont have a chamber vac, so I cant do this study myself.
very little to loose here.
Posted 14 January 2014 - 06:26 AM
Thanks for all the advice above, I have decided to do a course with Sous Vide Tools next week, so hopefully will get some hands on tips from it.
I have started to tone down the vac timing as some things (scallops) were getting squished!
I will definitely try the ice trick.
A question over cost was asked, I bought it from a company is Essex through eBay, they brought it over from China but never used it.
Also tagged with one or more of these keywords: Modernist
The Kitchen →
The Kitchen →
The Kitchen →
Culinary Culture →
Food Media & Arts →
The Kitchen →