Roasting my own coffee
#1
Posted 06 January 2006 - 11:36 PM
#2
Posted 07 January 2006 - 05:45 AM
"I think I hear a dingo eating your baby"-Bart Simpson
#3
Posted 07 January 2006 - 07:04 AM
Home Roast vs. Pro Roast
... and, given the rather passionate nature of the home roaster contingent, consensus seems to be that you can't really do better than the professional roasters we've explored here Master Roasters - esp. if you are using a hot air popper.
I think this is one area (as opposed to, say, pulling an espresso or... rice!) where - as of date - the technology, trouble, electrical constraints & quality control conspire to make paying a pro the better way to go.
"When you look at the face of the bear, you see the monumental indifference of nature. . . . You see a half-disguised interest in just one thing: food."
Werner Herzog; NPR interview about his documentary "Grizzly Man"...
#4
Posted 07 January 2006 - 11:29 AM
Sweet Maria's is an excellent source of information and beans. The definitive book on the subject is 'Home Coffee Roasting' by Kenneth Davids. Coffeegeek is one of the most popular websites for all things related to coffee and espresso, including home roasting.
Read the material at Sweet Maria's first, and then let me know if you have any questions.
Edited by MGLloyd, 07 January 2006 - 11:29 AM.
Regards,
Michael Lloyd
Mill Creek, Washington USA
#5
Posted 07 January 2006 - 12:30 PM
Without going to the book, which may not be easily available, can you tell us about your technique? What is a heat gun? How do you move the beans? How long? Will a steel wok or cast iron wok do the job? Fess up, if you please!I have been a home coffee roaster for about four-five years now, and I am quite confident that my coffee is better than anything I can buy locally. I moved on from a popper years ago. I currently use an industrial heatgun and stainless steel bowl to roast my coffee.
Sweet Maria's is an excellent source of information and beans. The definitive book on the subject is 'Home Coffee Roasting' by Kenneth Davids. Coffeegeek is one of the most popular websites for all things related to coffee and espresso, including home roasting.
Read the material at Sweet Maria's first, and then let me know if you have any questions.
#6
Posted 07 January 2006 - 03:38 PM
Another very simple method is stovetop roasting. I recently wrote a post on this method, using a heavy-gauge stockpot, on Coffeegeek, and have cut and pasted it below:
Longtime readers of this board will recall that I am a long-time fan of using the heatgun/dogbowl to roast. The other night, I was giving a poster on another board some tips about getting started in coffee roasting, and I gave him some information on stovetop pan roasting, and pointed him to Tiim Eggers' lovely site on this topic.
This morning, I needed some coffee for the office tomorrow, and just for the heck of it, thought about stovetop roasting. It has probably been a good four or five years since I last did stovetop roasting with any regularity, using both a stockpot and a Whirly-Pop. Back then, my usual batch size was 1 to 1.5 cups. My main concern over stovetop roasting these days was worry about the amount of smoke and chaff, since I usually roast one pound batch sizes.
But I decided to give this ancient method a whirl. So I dug out a Faberware stainless 3.5 qt. stockpot (with the clad aluminum disk bottom), heated it up for five minutes on my electric range (Whirlpool) on the large burner set to '4' on the control knob. I dumped in two cups by volume of Red Sea blend and started roasting. I stirred pretty frequently with a stainless balloon whisk to prevent scorching. I got to first crack at about 10 minutes, and it finished at a full city roast at about 15 minutes. I dumped, cooled and jarred the beans and repeated the experiment with three cups by volume (one pound by weight) of some Sumatra Mandheling that I had on hand. This got to first crack at about 15 minutes and finished to a full city plus roast at 21 minutes. Please note that I continued to stir the beans frequently to prevent scorching, turned the heat down to '3.5' as I got to first crack, and roasted both batches with the stockpot uncovered. Both of these batch times are longer than I would typically see with my HG/DB method.
Much to my surprise, the tall sides of the stockpot kept the chaff contained pretty well. The stovetop hood (vented to the outside) on 'high' managed the smoke pretty well. We were not smoked out of the house nor did the smoke detectors go off. Since this is one of my commonly-used pots for cooking, I will not be letting this pan season for roasting. There was a brown haze of baked-on coffee oils and volatiles, but it came right off with a Scotch pad and some Bar Keepers Friend.
Both of my roasts were fairly even but not as even as my HG/DB roasts, but I will continue experimenting. During the winter, I would not mind finding a method that I can do indoors, as opposed to outside on the front porch. My experience in roasting by other means came in quite handy with the stovetop, being able to monitor the roast by appearance, sound and smell. Tim Eggers is fond of using his cast-iron saucepan, and I thought the Farberware clad stockpot would serve a similar purpose in terms of heat retention and even bottom heating.
Some people have used a wok on the stovetop with good results. I can testify that you cannot use a wok with a heatgun since the beans will be blown right out of the wok.
If someone wanted to immediately try coffee roasting, I suspect that most readers of this board have a sturdy stockpot and a stovetop readily to hand. There is a learning curve to roasting coffee, and particularly with a stovetop method, I roast at medium heat (4 out of 10 on the knob) to prevent scorching. This should also only be done if you have good ventilation at the stovetop, since if you roast more than a cup of beans and/or roast to a dark roast, copious amounts of smoke are produced.
Please let me know if you have any further questions, and I will be happy to help.
Regards,
Michael Lloyd
Mill Creek, Washington USA
#7
Posted 07 January 2006 - 03:53 PM
Regards,
Michael Lloyd
Mill Creek, Washington USA
#8
Posted 11 January 2006 - 06:35 PM
Both of your posts have been very informative, and I think I will try roasting with a wok, a cover, an oven thermometer, and a whisk, on my patio with a propane burner, when the weather permits. It will take a couple of weeks to travel from my suburban location to downtown Toronto to get a selection of beans, but I'll report to this thread when the quest for fresh coffee is completed, or at least bettered.Here is the instruction sheet at Sweet Maria's for stovetop pan roasting: stovetop pan roasting instructions
In the past I have found cast iron woks in Chinese stores, for $15-20. Would this work better than a steel wok?
#9
Posted 11 February 2006 - 02:54 PM
My first batch, about 1/2 lb., of Costa Rican, came out OK but too brittle and dark.Here is the instruction sheet at Sweet Maria's for stovetop pan roasting: stovetop pan roasting instructions
I roasted it in a steel wok, over gas, on a cold patio day. I left it 1 minute too long as it was hard to judge in dim light.
I'm going at it again in mid week, hopefully a bit quicker and hotter, with lots of spoon movement.
I don't expect miracles, as it is below freezing every day on my patio now. But the first results were pleasant enough, just not superior, yet.
#10
Posted 11 February 2006 - 07:03 PM
Regards,
Michael Lloyd
Mill Creek, Washington USA
#11
Posted 13 February 2006 - 06:23 AM
Listen to the cracking sounds they make as the roast progresses. The "first crack" sounds are spaced a bit apart and sound like twigs cracking. The "second crack" sounds a bit more faint but they are more rapid and spaced closer together. It usually rolls directly into second crack from first crack but there may be a slight plateaus in bewteen. Most home roasts, unless they are intended to be very dark, will stop at the onset of second crack or just a few seconds into it (some commercial roasts will go just a bit faryer into second crack but they typically cool much faster)..
Using two colanders and tossing the beans back and forth between them for a minute or two does speed up cooling - always a good thing.
#12
Posted 13 February 2006 - 10:53 AM
#13
Posted 14 February 2006 - 08:58 AM
#14
Posted 14 February 2006 - 09:04 AM
I'm getting lots of good advice from these recent posts.Using two colanders and tossing the beans back and forth between them for a minute or two does speed up cooling - always a good thing.
Owen, at this time of year I can cool the beans by putting the wok into some snow!
Scuba, what is the stir crazy, convection oven method?
#15
Posted 15 February 2006 - 07:44 AM
I'm getting lots of good advice from these recent posts.
Using two colanders and tossing the beans back and forth between them for a minute or two does speed up cooling - always a good thing.
Owen, at this time of year I can cool the beans by putting the wok into some snow!
Scuba, what is the stir crazy, convection oven method?
Jay here is a website that gives some good general information and how to's
http://turbocrazy.atspace.com/
#16
Posted 22 February 2006 - 04:21 PM
Various things to keep in mind...I think this is one area (as opposed to, say, pulling an espresso or... rice!) where - as of date - the technology, trouble, electrical constraints & quality control conspire to make paying a pro the better way to go.
Considering the good greens you can get, by the pound, for between 2 and 3 U.S. dollars, and considering the very satisfactory results I get from home-roasting, there's absolutely no reason, it seems, to prefer the more expensive professional blends (which usually come closer to $15 to $20 per roasted pound). Some of the batches I've roasted have come out worlds better than various staples of Terroir and Intelligentsia, while all of my batches at the very least come close to "professional" quality. Considering the money I'm saving, too, I can't complain.
Another issue for me is that a lot of coffee goes stale beyond the week it was roasted (the degeneration of Intelligentsia's Black Cat is particularly noticeable); roasting my own batches means always having fresh coffee in the quantities I need. The entire experience is more flexible: you choose the beans, the proportions of blends, and so on.
Edited by vanveen, 22 February 2006 - 06:50 PM.
#17
Posted 08 March 2006 - 02:50 PM
I punched a hole in the top, put a meat thermometer in there, and start roasting when the temp hits 425. For most beans, I stop at the second crack, about 10 mins in. In seattle I found a few shops that roasted often enough and well enough for me, but since coming to the south, this is the only way to get anything close to the consistency and freshness I crave.
Being such a cheap ass, though, now I'm struggling with my coffee out-classing my grinder and machine. I wish there were as economical a solution on those two fronts.
Alas, I think I'm headed for Miss Silvia and a comparable grineder to replace my 2nd hand starbucks barista and low-end burr grinder.
#18
Posted 13 March 2006 - 10:35 AM
$2-3 is about 1/3 what I have to pay for green beans. If I had a source, I'd have a small sack shipped to me via internet.Various things to keep in mind...I think this is one area (as opposed to, say, pulling an espresso or... rice!) where - as of date - the technology, trouble, electrical constraints & quality control conspire to make paying a pro the better way to go.
Considering the good greens you can get, by the pound, for between 2 and 3 U.S. dollars, and considering the very satisfactory results I get from home-roasting, there's absolutely no reason, it seems, to prefer the more expensive professional blends (which usually come closer to $15 to $20 per roasted pound). Some of the batches I've roasted have come out worlds better than various staples of Terroir and Intelligentsia, while all of my batches at the very least come close to "professional" quality. Considering the money I'm saving, too, I can't complain.
#19
Posted 19 February 2009 - 03:30 PM
my husband is out in his shop making the whirlypop go buy itself!
I will keep you posted on how this goes
we just purchased some great coffee from Seven Bridges Coop rabid delivery and as good as but a little cheaper for what we wanted than Sweet Marias ..they are about equal buy us to be honest
the way we brew when we really want to enjoy home roasted coffee is to mix a med and dark roast half and half then making it a moka pot
so freaking good
I would have never known about it if was not from another member her so thanks it has been fun
but now that HE is in the shop with the serious look and all the tools
sick turning that crank but not willing to give up home roasted coffee :)
Edited by hummingbirdkiss, 19 February 2009 - 03:33 PM.
#20
Posted 01 March 2009 - 05:50 PM
A little over a year ago, we bought one of the first Behmor 1600's to play around with. It's a very capable unit with decent, but not wonderful profiling capabilities. If you enjoy home roasting and would like something that offers more repeatability than airpoppers or greater ease of use than heat guns, the $300 you'd spend on a Behmor might be worth it.
As I'm a co-owner of a coffeehouse that uses primarily Intelli coffees, I'll suggest that the advantage of buying from a larger roaster is QC and dependability (along with convenience of not taking an hour out of your day to roast). Most important to us is that they buy coffees using a Direct Trade model.
However, there's little doubt that roasting one's own is fun, will be less expensive in the long run, and allows you more opportunity to discover both coffees and roast levels that fit your particular palate
As to home roasts being uniformly better? I've been a judge at several barista competitions and have had home roasters pull me shots of what, in their opinion, was the best espresso I'd ever taste. They weren't. Ever. And it wasn't the equipment.
That said, I competed myself this year using a Behmor-roasted blend of Esmeralda (Lot 5) and Brazil Cerrado and did as well on the judges scoresheets for my espresso round as competitors who were using Black Cat, and in some cases better.
With good beans, a reliable and repeatable roasting method, and a bit of tasting and tweaking, much is possible.
Mt. Lebanon, PA
Drinking great coffee makes you a better lover.
There is no scientific data to support this conclusion, but try to prove otherwise. Go on. Try it. Right now.
#21
Posted 01 March 2009 - 06:26 PM
This is not a huge surprise. It would be shocking if the very best artisinal coffee roasters weren't able to outdo home roasters when freshness is equal. The problem is that freshness usually isn't equal for the home coffee enthusiast. Sure, there are probably some specialty coffee shops that are getting their Black Cat the very next day after it's roasted. But even if you're willing to pay the $14 per pound plus shipping, by the time you get that Black Cat into your espresso machine, it's already around 4 days old. And, of course, you have to order the stuff at least once a week to have a decent supply of truly fresh coffee -- something few people are willing or able to do.As to home roasts being uniformly better? I've been a judge at several barista competitions and have had home roasters pull me shots of what, in their opinion, was the best espresso I'd ever taste. They weren't. Ever. And it wasn't the equipment.
Edited by slkinsey, 01 March 2009 - 06:27 PM.
#22
Posted 28 May 2009 - 01:19 PM
#23
Posted 16 November 2009 - 07:21 PM
Has anyone roasted their own coffee, created their own blend and if so, was it worth it? How was it?
#24
Posted 17 November 2009 - 08:21 AM
If you're willing to make the investment in a quality roaster and you look at this as more of a hobby than a money-saving technique, then I imagine you could make it work. However, I found the results weren't worth the input of time and effort. It was fun and the coffee was good (not excellent), but it turned out to be something I just stopped doing.
#25
Posted 17 November 2009 - 08:42 AM
#26
Posted 17 November 2009 - 09:15 AM
Edited by mhjoseph, 17 November 2009 - 09:20 AM.
#27
Posted 17 November 2009 - 10:16 AM
I just made a cornish game hen with chestnut stuffing. . .
Would you believe a pigeon stuffed with spam? . . .
Would you believe a rat filled with cough drops?
Moe Sizlack
#28
Posted 17 November 2009 - 12:21 PM
I started roasting my own a couple years ago with guidance from this very forum. I buy 2lb bags of fair-trade green arabica beans and roast them in my $10 hot air popcorn machine. Mixing different beans is great fun -- make your own Christmas blend.
Me, too. And the hot air popper works great. In fact, I gave a popper and some green beans to my nephew last year and he roasts all his own coffee now. Wonderful fun, he says. And he adds that one of the best things is that his house "always smells like a Starbucks now."
Edited by heidih, 18 November 2009 - 01:36 PM.
delete link to this topic after merge
IF YOU'RE HAPPY AND YOU KNOW IT SLAP YOUR FRIENDS.
#29
Posted 15 August 2010 - 01:04 PM
We generally pay less than $5/lb for our green beans and the modest investment of less that $100 all in to put the stir-crazy/convection oven roaster together amortized in maybe 2 months.
One of the very best places I've found to procure green beans is the Green Coffee Coop. You have to keep an eye on their site since offerings are somewhat infrequent but every single variety we have ordered through the coop has been excellent.
Edited by 6ppc, 15 August 2010 - 01:05 PM.
Jon
#30
Posted 24 August 2010 - 11:51 AM










