cannele pan
#1
Posted 03 June 2004 - 02:58 PM
#2
Posted 03 June 2004 - 10:24 PM
I will do my best to answer.
James
#3
Posted 04 June 2004 - 05:31 AM
http://www.jbprince....ROD&ProdID=1366
There are a few different brand names--like Flexipan, Gastroflex, etc--and come in different colors--gray, black, orange. Depending on the brand they can range from 1/4 sheet to full sheet size. The 1/4 sheet sizes of the cannele have maybe 18 to 20 cavities.
Pastry chef-Restaurant Consultant
Oyamel : Zaytinya : Cafe Atlantico : Jaleo
chef@pastryarts.com
#4
Posted 04 June 2004 - 08:28 PM
Alas, I have much to learn about them, and can only say that they are among a bunch of things which I have been meaning to get to.... The classic molds are made of thick metal, and it has only been since these things have been enjoying their fifteen minutes of celebrity that molds are being made out of that new fangled flexible material.
I suspect that the new molds are less than ideal, and that home ovens do not maintain/retain enough sudden and sustained heat to achieve the desired dark bake and agreeably dense texture.
Thanks for your patience
James
#5
Posted 10 June 2004 - 09:12 AM
Bonne chance,
Jeffrey
#6
Posted 14 June 2004 - 02:32 PM
I made mine by following the Paula Wolfert recipe to the letter, except, not having a source for virgin beeswax to make my white oil, I just lubricated the canele molds with vegetable oil.
I placed the mold on a silpat sheet and then on a stainless steel cookie sheet.
Poured in my very liquid batter, wondering how something so liquid would work, and put them in the oven at 400 F for two hours. They came out looking exactly like the pictures I have seen. Visually perfect. White top where the indentation is, brown to black exterior that hardened up into a crispy crust, and a custard-y interior.
Visually perfect, but the taste? Blecch. The caramel was so dark and bitter and center had no sweetness. I finished them off convincing myself that this was an exotic taste that one would acquire. And indeed, they did seem to get better, though not by much.
Now, I have three other, different recipes to try, to see if this is just a pastry that doesn't taste good to me or what, having never tried an authentic one.
Hope that helps.
Jay
#7
Posted 14 June 2004 - 02:54 PM
I, too, came accross bee's (bees'? how much wax can one bee produce?!!!) in Lenotre's book on traditional French desserts ( which I'm fond of because it seems to be a work of love, much more so than his earlier stuff).
In my answer, I used some such phrase as " fifteen minutes of celebrity " because having eaten a few in France ( and from reputable outfits), I have come to the conclusion that they are a curiosity, more than anything else. I've been meaning to make a few just to find out how they work, and would make them once in a while but not all the time.
What you mentioned about the taste and texture seems pretty much on track. The old fashioned metal molds are probably still the best idea, but at the same time, it is perhaps the beauty of them which helped start the craze.....
Thanks for your comments
James
#8
Posted 20 June 2004 - 06:51 AM
Well, they came out fantastic after one hour. Not as black as Wolfert's recipe, but creamy, sweet, with a chewy outer surface. This recipe called for 'don't fill all the way to the top'. Since the Wolfert recipe canele had major shrinkage in the molds, I did fill to the top, and the canele souffle'd up. Lesson learned.
Flavor is terrific. On the sugar side. Here's the web link
http://www.foodnetwo...6_16275,00.html
#9
Posted 21 June 2004 - 07:38 AM
For the record, the Wolfert recipe is in her latest cookbook, on Slow Mediterranean cooking. It is very possible that her recipe, albeit inedible, is the correct one.
However, for tasty canele, with a sweet center, and a chewy crispy exterior, that is, a dessert that is enjoyable, go with the Food Network recipe I posted.
Also, don't worry about the souffle rise I mentioned, just fill the canele molds to the top. They will shrink a bit.
What I found was that with the Gastoplex silicone mold I have, it will not be possible to get visually perfect canele, so don't sweat it. They will be uneven and each have their own shape.
Next, I cheated and did not use vanilla bean when I cooked my milk. I actually used Clear Van imitation vanilla, based on a recent Cooks Illustrated evaluation that, in cooked high heat baking, the imitation vanilla actually holds up better and delivers a better vanilla taste. I concur with their assessment, and save my better quality vanilla extracts for non-heat use such as whipped cream.
#10
Posted 21 June 2004 - 08:13 AM
#11
Posted 21 June 2004 - 09:52 PM
For truly authentic results, beeswax is an essential ingredient, not simply the grease for the molds. It adds that glorious sheen to the finished product and definitely is part of what makes for the perfect crisp/chewy exterior. I've made canneles with simply oil or butter and the final result is not as good.
I am sure that copper molds deliver the best product however I use the Silicon Flex molds available from Bridge Kitchenware (and other sources, but I originally purchased mine at Bridge). As you can read in the original canneles thread, Paula has tried several silicon molds and agrees that the best results were from the Silicon Flex.
As Carolyn mentioned, all this has been more than thoroughly discussed on the original thread here on egullet. But hearing the word "inedible" applied to a recipe that is thoroughly authentic, exhaustively researched, and tested over and over again (including by many of us here on egullet), I just can't believe that you would get inedible results had the recipe been prepared correctly. In all sincerity, I am not being critical of you, Jay, I am just defending what I know to be an excellent recipe.
"I'm bringing pastry back"
Weebl
#12
Posted 23 June 2004 - 10:11 PM
I had the honor of cooking dinner once for Paula Wolfert, and in light of all of this, thank my lucky stars I didn't make caneles.....
Toodles
James
#13
Posted 23 June 2004 - 10:39 PM
cheers,
Paula










